Path Pocket Shape/ru

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Path Pocket Shape and the translation is 7% complete.
Outdated translations are marked like this.

Path Pocket.svg Path Pocket

Системное название
Path Pocket
Расположение в меню
Path → Pocket Shape
Быстрые клавиши
Представлено в версии
См. также


The Path Pocket Shape.svg Pocket Shape tool creates a pocketing operation from selected bottom faces, or walls, of one or more pockets of the jobs base object.

The Path Pocket Shape object is made to be part of a Path Job.svg Path Job.

Path Pocket Shape example.png


  1. Select the bottom or the wall(s) of a pocket. While it is usually easier to select the bottom, the walls have to be selected when a pocket goes through all.
  2. There are several ways to invoke the command:
    • Press the Path Pocket Shape.svg Path Pocket Shape button.
    • Select the Path → Path Pocket Shape.svg Pocket Shape option from the menu.
  3. Adjust the desired properties.


Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.


Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.

  • ДанныеPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
    • ДанныеAngle: Angle in degrees applied to rotation of the object around Axis property value
    • ДанныеAxis: Axis (one or multiple) around which to rotate the object, set in sub-properties: X, Y, Z
      • ДанныеX: X axis value
      • ДанныеY: Y axis value
      • ДанныеZ: Z axis value
    • ДанныеPosition: Position of the object, set in sub-properties: X, Y, Z - with respect to the origin (or origin of parent object container)
      • ДанныеX: X distance value
      • ДанныеY: Y distance value
      • ДанныеZ: Z distance value
  • ДанныеLabel: User-provided name of the object (UTF-8)


  • ДанныеClearance Height: The height needed to clear clamps and obstructions
  • ДанныеFinal Depth: Final Depth of Tool- lowest value in Z
  • ДанныеFinish Depth: Maximum material removed on final pass. The height (thickness) of the last cutting level - set for a better finish.
  • ДанныеSafe Height: The height above which Rapid motions are allowed. (Rapid safety height between locations)
  • ДанныеStart Depth: Starting depth of Tool - first cut depth in Z
  • ДанныеStep Down: Incremental step down of Tool during operation


Visual reference for Depth properties (settings)


  • ДанныеExtension Corners: When enabled connected extension edges are combined to wires.
  • ДанныеExtension Length Default: Default length of extensions.


  • ДанныеOffset Pattern: Clearing pattern to use. (Select in which manner the horizontal movements should be done.)


  • ДанныеActive: Make False, to prevent operation from generating code
  • ДанныеComment: An optional comment for this Operation
  • ДанныеUser Label: User assigned label
  • ДанныеTool Controller: Defines the Tool controller used in the Operation


  • ДанныеCut Mode: Specifies a CW or CCW move for the cut
  • ДанныеExtra Offset: Extra offset to apply to the operation. Direction is operation dependent. (Extra value to stay away from final profile good for roughing toolpath)
  • ДанныеKeep Tool Down: Attempts to avoid unnecessary retractions.
  • ДанныеMin Travel: Use 3D Sorting of Path (when multiple base geometries used).
  • ДанныеStart At: Start pocketing at center or boundary.
  • ДанныеStep Over: Select the horizontal step over (Percent of tool diameter: 100% = tool diameter).
  • ДанныеUse Outline: Uses the outline of the base geometry.
  • ДанныеZig Zag Angle: Angle of the zigzag pattern. (Select the path angle relative to X axis.)


  • ДанныеAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
  • ДанныеB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).
  • ДанныеEnable Rotation: Enable rotation to gain access to pockets or areas not normal to Z axis.
  • ДанныеInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
  • ДанныеReverse Direction: Reverse orientation of Operation by 180 degrees.

Start Point

  • ДанныеStart Point: The start point of this path.
  • ДанныеUse Start Point: Make True, if manually specifying a Start Point, then enter Start Points in the property data Start Points field.

Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above.

This section is simply a layout map of the settings in the window editor for the Operation.

Base Geometry

  • Add: Adds selected element(s) which should be the base(s) for the path(s)
  • Delete: Delete the selected item(s) in the Base Geometry list
  • Clear: Clear all items in the Base Geometry list


  • ДанныеShow All: If selected, all potential extensions are visualized. Enabled extensions in purple, disabled extensions in yellow.
  • ДанныеExtension Corners
  • ДанныеExtension Length Default
  • Enable
  • Disable
  • Clear


  • ДанныеStart Depth
  • ДанныеFinal Depth
  • ДанныеStep Down


  • ДанныеSafe Height
  • ДанныеClearance Height


  • ДанныеTool Controller
  • ДанныеCut Mode
  • ДанныеPattern (Offset Pattern)
  • ДанныеAngle (Zig Zag Angle)
  • ДанныеStep Over Percent (Step Over)
  • ДанныеPass Extension: The distance the facing operation will extend beyond the boundary shape (base geometry)



Смотрите так же: Основы составления скриптов в FreeCAD.

#Place code example here.