Pfad Gravur
Jump to navigation
Jump to search
Path
Anwenderdokumentation
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
|
Menüeintrag |
---|
Path → Gravieren |
Arbeitsbereich |
Path |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Keiner |
Beschreibung
The Engrave tool is primarily for engraving a
Draft ShapeString onto a part. However, it may be useful for other kinds of 2D.
Anwendung
Empty
Optionen
Empty
Eigenschaften
Daten
Base
- DatenPlacement:
- DatenLabel: User name of the object (UTF-8)
Depth
- DatenClearance Height: The height needed to clear clamps and obstructions
- DatenFinal Depth: Final Depth of Tool- lowest value in Z
- DatenSafe Height: The above which Rapid motions are allowed.
- DatenStart Depth: Starting Depth of Tool- first cut depth in Z
- DatenStep Down: Incremental Step Down of Tool
Path
- DatenActive: Make False, to prevent operation from generating code
- DatenBase: The base geometry for this operation
- DatenComment: An optional comment for this operation
- DatenCoolant Mode: Coolant mode for this operation
- DatenCycle Time: Estimated cycle time for this operation
- DatenStart Vertex: The vertex index to start the path from
- DatenTool Controller: The tool controller that will be used to calculate the path
- DatenUser Label: User assigned label
Hidden
- DatenBase Object:
- DatenBase Shapes:
- DatenExpression Engine:
- DatenLabel2:
- DatenPath:
- DatenProxy:
- DatenVisibility:
View
Empty
Scripting
Siehe auch: FreeCAD Grundlagen Skripten.
Beispiel:
#Place code example here.
- Project Commands: Job, Post Process, Check the path job for common errors, Export Template
- Tool Commands: Inspect Path Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- Path Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting

- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Path, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web