Rampa de entrada

From FreeCAD Documentation
Jump to navigation Jump to search
This page is a translated version of the page Path DressupRampEntry and the translation is 8% complete.
Other languages:

Path DressupRampEntry.svg Path DressupRampEntry

Menu location
Path → Path Dressup → RampEntry Dressup
Default shortcut
Introduced in version
See also
Path DressupTag, Path DressupDogbone, Path DressupDragKnife


The tool Path DressupRampEntry.svg DressupRampEntry dresses up an existing path to add a ramp entry.


  1. Select a contour or profile path objects
  2. click the Path DressupRampEntry.svg RampEntry Dress-up menu item


  • Ramp Feed Rate : Can either be the current vertical or horizontal feed rate or some other custom value
  • Angle : Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
  • Method : Used to select different modes of ramping:
    • RampMethod1: goes down at the ramp angle and the moves horizontal to the target point
    • RampMethod2: goes horizontal first and then down at the ramp angle to the target point
    • RampMethod3: goes down in a zigzag way
    • Helix: goes down spiraling
  • Dressup Start Depth : The distance above the target level where ramping starts
  • Use Start Depth : Indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.

Ramp method 1.png Ramp method 2.png Ramp method 3.png

From left to right: Ramp method 1, 2 and 3

Ramp method Helix.png

Ramp method Helix