CAM: Wstawka G-code
CAM Custom |
Menu location |
---|
CAM → Supplemental Commands → Custom |
Workbenches |
CAM |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The tool Custom inserts a path object which is built from hand coded custom G-code.
Because the Custom G-code command provides no link to a Tool Controller, if a Tool is used by the custom G-code, the Tool index must be written, along with the Spindle Start M-code, in order that it is passed to the Postprocessor. This ensures that Tool changes and starts will be properly generated.
For example, to convey to the Postprocessor that the Tool used in the Custom G-code operation has Tool index 6, and a Spindle Speed of 10,000, insert the following code at the beginning of the Custom G-code Operation:
(T6: 4mm Endmill)
M6 T6
M3 S10000
Note that Feed rates will be correctly generated by the Postprocessor, only if the Custom G-code Feed rates are written in Units/second.
Usage
- Press the Custom button
- Write custom G-code in the G Code property of the newly created object. Refer to the CAM scripting page for supported G-code commands.
Properties
- DANEG Code: The custom G-code commands to build the path on.
- Polecenia projektu: Zadanie, Przetwarzanie końcowe, Bezpieczeństwo, Eksport szablonu
- Polecenia narzędzi: Przeglądaj polecenia ścieżki, Symulator, Krawędzie w pętli, Przełącz aktywną operację, Otwarta biblioteka narzędzi, Stacja dokująca narzędzi
- Operacje podstawowe: Kontur, Kształt kieszeni, Owierty, Powierzchnia obróbki, Helisa, Algorytm adaptacyjny, Wpust, Grawer, Usuwanie zadziorów, Wycięcie V
- Operacje 3D: Obiekt 3D kieszeni, Powierzchnia 3D, Linia poziomu
- Ulepszenia: Odwzorowanie osi, Ulepszenie ścieżki konturu, Nadcięcie w narożniku, Rylec, Wprowadzenie / Wyprowadzenie, Parkowanie narzędzia, Pola mocujące, Korekta głębokości Z
- Polecenia uzupełniające: Mocowanie, Komentarz, Stop, Wstawka G-code, Sonda, G-code z kształtu
- Modyfikacja zadania: Kopia operacji w zadaniu, Szyk, Szybka kopia
- Operacje specjalne: Frezowanie gwintów
- Różności: Obszar, Obszar płaszczyzny roboczej
- Konstrukcja narzędzi: Narzędzia, Kształt narzędzia, Końcówki skrawające, Biblioteka narzędzi, Kontroler narzędzi
- Dodatek: Preferencje, Tworzenie skryptów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web