Part Ellipsoid
|
|
| Ubicación en el Menú |
|---|
| Part → Create Primitives → Ellipsoid |
| Entornos de trabajo |
| Part, OpenSCAD |
| Atajo de teclado por defecto |
| Ninguno |
| Introducido en versión |
| - |
| Ver también |
| .. |
Description
A Part Ellipsoid is a parametric solid that can be created with the
Part Primitives command. In the coordinate system defined by its DatosPlacement property, the axes of the ellipsoid are aligned with the X, Y and Z axes, and therefore its center is positioned at the origin.
A Part Ellipsoid can be truncated at the top and/or bottom by changing its DatosAngle1 and/or DatosAngle2 properties. It can be turned into a segment of an ellipsoid by changing its DatosAngle3 property.
Usage
See Part Primitives.
Example

A Part Ellipsoid object created with the scripting example below is shown here.
Properties
See also: Property View.
A Part Ellipsoid object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Attachment
The object has the same attachment properties as a Part Part2DObject.
Ellipsoid
- DatosRadius1 (
Length): The radius of the ellipsoid in its Z-direction. The default is2mm. - DatosRadius2 (
Length): The radius of the ellipsoid in its X-direction. The default is4mm. - DatosRadius3 (
Length): The radius of the ellipsoid in its Y-direction. The default is4mm. - DatosAngle1 (
Angle): The start angle of the elliptical sides of the ellipsoid. Valid range:-90° <= value < 90°. Must be smaller than DatosAngle2. The default is-90°. - DatosAngle2 (
Angle): The end angle of the elliptical sides of the ellipsoid. Valid range:-90° < value <= 90°. Must be larger than DatosAngle1. The default is90°. If the total angle of the elliptical sides is smaller than180°the ellipsoid will be truncated and have a flat face at the top and/or bottom. - DatosAngle3 (
Angle): The total angle of the ellipsoid in its XY-plane. Valid range:0° < value <= 360°. The default is360°. If it is smaller than360°the resulting solid will be a segment of an ellipsoid.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Ellipsoid can be created with the addObject() method of the document:
ellipsoid = FreeCAD.ActiveDocument.addObject("Part::Ellipsoid", "myEllipsoid")
- Where
"myEllipsoid"is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
ellipsoid = doc.addObject("Part::Ellipsoid", "myEllipsoid")
ellipsoid.Radius1 = 2
ellipsoid.Radius2 = 4
ellipsoid.Radius3 = 6
ellipsoid.Angle1 = -90
ellipsoid.Angle2 = 50
ellipsoid.Angle3 = 300
ellipsoid.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(15, 0, 20))
doc.recompute()
- Creation and modification: New Sketch, Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Face From Wires, Ruled Surface, Loft, Sweep, Section, Cross-Sections, 3D Offset, 2D Offset, Thickness, Project on Surface, Appearance per Face
- Boolean: Compound, Explode Compound, Compound Filter, Boolean Operation, Cut, Union, Intersection, Connect Shapes, Embed Shapes, Cutout Shape, Boolean Fragments, Slice Apart, Slice to Compound, Boolean XOR, Check Geometry, Defeaturing
- Other tools: Box Selection, Shape From Mesh, Points From Shape, Convert to Solid, Reverse Shapes, Simple Copy, Transformed Copy, Shape Element Copy, Refine Shape, Set Tolerance, Persistent Section Cut, Attachment
- Preferences: Preferences, Fine tuning
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub