도형 검사
Appearance
Outdated translations are marked like this.
|
도형 검사 |
| Menu location |
|---|
| 부품 → 도형 검사 |
| Workbenches |
| 부품 작업대 |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| None |
설명
용법
선택 사항
설정 페이지 건너뛰기
이 확인란을 선택하면 이후 도구를 호출할 때 설정 작업 패널이 표시되지 않습니다.
BOP 검사 실행
체크하면, 부울 연산(BOP:Boolean OPerations) 검사도 추가로 수행됩니다.
Single-threaded
Run the geometry check in a single thread. This is slower, but more stable.
오류 기록
체크하면 발견된 모든 오류도 보고서 보기에 기록됩니다.
형상 내용(Shape Content)
이 도구는 잠재적인 기하학적 오류를 감지하는 것 외에도 선택한 대상체에 대한 다양한 속성을 보여줍니다:
- 검사 대상체 이름
- 형상 유형
- 기하학적 실체들의 수: 꼭지점, 모서리, 철사(Wire), 면, 껍질(Shell), 고체, 복합 고체, 화합물, 전체 형상 수
- 기하학적 및 질량 속성:
- 면적
- 부피
- 질량
- 길이
- 질량 중심
- 방향
- 대칭 축
- 대칭 점
- 모멘트
- 관성의 첫 번째 축
- 관성의 두 번째 축
- 관성의 세 번째 축
- 회전 반경
- 전역 배치
Advanced shape content
Show advanced shape content. Changes will take effect next time you use the check geometry command.
Individual boolean operation checks
The user can choose the type of boolean operation to be checked:
- Bad type
- Self-intersect
- Too small edge
- Nonrecoverable face
- Continuity
- Incompatibility of face
- Incompatibility of vertex
- Incompatibility of edge
- Invalid curve on surface
보충 설명
- 적절한 개체 유형에 연결된 앱 링크 개체와 적절한 표시 개체가 포함된 앱 파트 컨테이너도 이 도구를 사용하여 확인할 수 있습니다. 앱 링크의 경우 링크된 객체의 모양이 검사 됩니다. 앱 파트 컨테이너의 경우 그 안에 있는 보이는 객체는 화합물로 확인됩니다. introduced in 0.20
- FreeCAD에는 오류가 있는 형상을 자동으로 수정하는 방법이 없습니다. 오류가 확인되면 모형을 만드는 데 필요한 단계를 검사하여 수동으로 수정해야 합니다.
- Creation and modification: New Sketch, Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Face From Wires, Ruled Surface, Loft, Sweep, Section, Cross-Sections, 3D Offset, 2D Offset, Thickness, Project on Surface, Appearance per Face
- Boolean: Compound, Explode Compound, Compound Filter, Boolean Operation, Cut, Union, Intersection, Connect Shapes, Embed Shapes, Cutout Shape, Boolean Fragments, Slice Apart, Slice to Compound, Boolean XOR, Check Geometry, Defeaturing
- Other tools: Box Selection, Shape From Mesh, Points From Shape, Convert to Solid, Reverse Shapes, Simple Copy, Transformed Copy, Shape Element Copy, Refine Shape, Set Tolerance, Persistent Section Cut, Attachment
- Preferences: Preferences, Fine tuning
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub