O-X-Y Type Attachment Modes
Here we provide more detailed information on the use of Align O-X-Y type modes in the Part Attachment editor.
These modes are:
- Align O-Z-X
- Align O-Z-Y
- Align O-X-Y
- Align O-X-Z
- Align O-Y-Z
- Align O-Y-X
These modes are used to attach to a specified vertex, with an orientation determined by reference to other vertices or edges.
Reference1 must be a vertex. The origin is mapped to this selected point.
Note: If an edge is selected for Reference1, O-X-Y type modes are not offered.
Reference2 and Reference3 must be either vertices or edges. They provide direction information. For a vertex, the direction is from the origin to the selected vertex. For an edge, it is the direction of the edge. Reference3 is optional.
Take mode O-X-Z as an example:
- The O represents the origin, corresponding to Reference1.
- The X indicates that the X-axis of the attached object is to be aligned with the direction of Reference2.
- The Z indicates that the Z-axis of the attached object is to be aligned with the component of the direction of Reference3 at right angles to the X-axis.
- The Y-axis completes the orthogonal right-hand axis triad.
For other modes, the axes are mapped in a corresponding fashion.
If Reference3 is not provided, FreeCAD makes default choices for it.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub