Befestigungsverfahren der Art O-X-Y
Hier werden detailliertere Informationen zur Anwendung der Befestigungsverfahren der Art Ausrichten O-X-Y unter Part Befestigen.
Diese Verfahren sind:
- Ausrichten O-Z-X
- Ausrichten O-Z-Y
- Ausrichten O-X-Y
- Ausrichten O-X-Z
- Ausrichten O-Y-Z
- Ausrichten O-Y-X
These modes are used to attach to a specified vertex, with an orientation determined by reference to other vertices or edges.
Reference1 must be a vertex. The origin is mapped to this selected point.
Note: If an edge is selected for Reference1, O-X-Y type modes are not offered.
Reference2 and Reference3 must be either vertices or edges. They provide direction information. For a vertex, the direction is from the origin to the selected vertex. For an edge, it is the direction of the edge. Reference3 is optional.
Take mode O-X-Z as an example:
- The O represents the origin, corresponding to Reference1.
- The X indicates that the X-axis of the attached object is to be aligned with the direction of Reference2.
- The Z indicates that the Z-axis of the attached object is to be aligned with the component of the direction of Reference3 at right angles to the X-axis.
- The Y-axis completes the orthogonal right-hand axis triad.
For other modes, the axes are mapped in a corresponding fashion.
If Reference3 is not provided, FreeCAD makes default choices for it.
- Grundkörper: Würfel, Kegel, Zylinder, Kugel, Torus, Grundkörper, Shapebuilder
- Objekte ändern: Boolesche Operationen, Vereinigung, Schnitt, Ausschneiden, Join features, Connect, Embed, Cutout
- Aufteilungswerkzeuge: Boolesche Fragmente, Slice a part, Slice, XOR, Part Defeaturing
- Verbund: Erzeuge Verbund, Verbund auflösen, Compound Filter; Extrudieren, Kanten abrunden, Drehen, Schnitt, Schnitte..., Abschrägen, Spiegelung, Ruled Surface, Sweep, Loft
- Offset-Werkzeuge: 3D Offset, 2D Offset, Dicke, Projection on surface
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web