Macro TimingGear
Description |
---|
This macro creates GT2/GT3/GT5 timing gears. Macro version: 1.5.0 Last modified: 2019-12-29 FreeCAD version: 0.18.5 Download: download here Author: eaguirre, galou |
Author |
eaguirre, galou |
Download |
download here |
Links |
Macros recipes How to install macros How to customize toolbars |
Macro Version |
1.5.0 |
Date last modified |
2019-12-29 |
FreeCAD Version(s) |
0.18.5 |
Default shortcut |
None |
See also |
None |
Description
This macro creates GT2/GT3/GT5 timing gears to be used with timing belts. It uses operations of the PartDesign Workbench.
The purpose of timing gears is to allow the camshaft and crankshaft to turn the timing chain. The crankshaft turns to move pistons up and down inside the cylinders. The camshaft turns to allow intake and exhaust valves on the cylinders to open and close. These components are important for proper engine timing.
Timing gears are connected to a timing belt or timing chain.
Above: Example of usage of 2 timing pulleys created with the TimingGear macro. Both pulleys were modified to add more features. The GT2 pulleys drive the Z axis of a 3 axis CNC machine.
Usage
|
Notes
- If you need to create a double head GTx pulley you can create 2 pulleys with the same parameters and then join them with a boolean operation.
- The pitch of the timing belts (distance from tooth center to tooth center of consecutive teeth) is specified in types. GT2 has a pitch of 2 mm, GT3 of 3 mm, GT5 of 5 mm etc..
Useful formulas
- addendum diameter = pitch diameter + 2 * module
- belt length = 2 * axle base + belt tooth pitch : 2 * (teeth 1 + 2) + belt tooth pitch² : 4 * pi² * axle base * (teeth 1 - 2)²
- axle base = belt length : 4 - belt tooth pitch : 8 * (teeth 1+2) + ¼ * sqrt [belt length - ½ * belt tooth pitch * (teeth 1+2)² - 2 * belt tooth pitch² * (teeth 1+2)² : pi²]
Links
- Forum thread: GT2, GT3 and GT5 Timing Gear Creator.
- You can also create timing gears with the FCGear TimingGear command from the external FCGear Workbench.
Script
Macro_TimingGear.FCMacro
# -*- coding: utf-8 -*- """Macro GT2/GT3/GT5 Timing Gear Creator for FreeCAD.""" # # ----------------------------------------------------------------------------- # Copyright (c) 2019 - Emilio Aguirre # ----------------------------------------------------------------------------- # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLEFOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # --------------------------------------------------------------------------------------- # TimingGear.png courtesy of Wikipedia # (https://en.wikipedia.org/wiki/Key_%28engineering%29). # # Changelog # --------- # - v 1.5: # - Fix position of base. # - v 1.4: # - Fixing bugs related to size of top and base # - Adding code to keep dialog upfront main window (thanks mario52 !) # - v 1.3: # - Adding key for shaft hub # - Fixing issue with top # - Fixing issue with shaft (now values are in diameter) __Name__ = 'GT2/GT3/GT5 Timing Gear Creator' __Comment__ = 'GT2/GT3/GT5 Gear Creator Macro (any gear size from 5 to 360 teeth)' __Author__ = 'eaguirre,galou' __Version__ = '1.5.0' __Date__ = '2019-12-29' __License__ = 'LGPL-2.0-or-later' __Web__ = 'http://www.emilioaguirre.com' __Wiki__ = 'https://wiki.freecadweb.org/Macro_TimingGear' __Icon__ = 'TimingGear.png' __Help__ = 'Click on the TimingGear button/macro, and enter the required data in the dialog window.' __Status__ = '' __Requires__ = 'FreeCAD ?.??' __Communication__ = 'info_at_emilioaguirre.com,https://github.com/FreeCAD/FreeCAD-macros/issues://forum.freecadweb.org/viewtopic.php?t=35899' __Files__ = 'TimingGear.png' # TODO: Fix segfault when clicking a second time on "Create". import math from PySide import QtCore from PySide import QtGui import FreeCAD as app import FreeCADGui as gui import Part # From FreeCAD. import ProfileLib.RegularPolygon # From FreeCAD. from FreeCAD import Base try: _fromUtf8 = QtCore.QString.fromUtf8 except AttributeError: def _fromUtf8(s): return s try: _encoding = QtGui.QApplication.UnicodeUTF8 def _tr(context, text, disambig=None): return QtGui.QApplication.translate(context, text, disambig, _encoding) except AttributeError: def _tr(context, text, disambig=None): return QtGui.QApplication.translate(context, text, disambig) def _circle_intersect_vline(x, r): y = math.sqrt(r*r - x*x) return y def _polar(angle_deg, radius, pt): """Convert from polar to Cartesian. Convert from polar coordinates (theta, radius) to cartesian coordinates. The result is added to the given vector pt """ p = app.Vector(0, 0, 0) p[0] = pt[0] + radius * math.cos(math.radians(angle_deg)) p[1] = pt[1] + radius * math.sin(math.radians(angle_deg)) return p def _bisector_vector(v1, v2, m): """Get the vector between two vectors.""" return (v1 + v2).normalize() * m # ----------------------------------- # QT Window Class # ----------------------------------- class TimingGearWindow(object): def __init__(self, main_window): self.with_shaft = True self.circular_shaft = True # Hexagonal if False. self.shaft_diameter = 5.0 self.gear_height = 6.0 self.base_height = 1.0 self.base_diameter = 6.37 self.top_height = 1.0 self.top_diameter = 6.37 self.with_base = False self.with_top = False self.max_shaft_diameter = 100.0 self.tooth_count = 20 self.with_key = False self.key_b = 2 self.key_h = 2 self.t1 = 1.2 self.t2 = 1 # UI Definition win_width = 300.0 win_height = 340.0 self.window = main_window main_window.setObjectName(_fromUtf8('GT2/GT3/GT5 Timing Gear')) main_window.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint) main_window.resize(win_width, win_height) self.central_wdgt = QtGui.QWidget(MainWindow) # UI Elements self.type_lbl = QtGui.QLabel(self.central_wdgt) self.type_lbl.setGeometry(QtCore.QRect(win_width*0.05, win_height*0.01, 150, 16)) self.type_combo = QtGui.QComboBox(self.central_wdgt) self.type_combo.addItems(['GT2', 'GT3', 'GT5']) self.type_combo.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.01, 95, 20)) self.type_combo.currentIndexChanged.connect(self._on_gt_type_change) self.tooth_count_lbl = QtGui.QLabel(self.central_wdgt) self.tooth_count_lbl.setGeometry(QtCore.QRect(win_width*0.05, win_height*0.08, 150, 16)) self.tooth_count_spin = QtGui.QSpinBox(self.central_wdgt) self.tooth_count_spin.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.08, 100, 22)) self.tooth_count_spin.setMinimum(5) self.tooth_count_spin.setMaximum(360) self.tooth_count_spin.setSingleStep(1) self.tooth_count_spin.setValue(self.tooth_count) self.tooth_count_spin.valueChanged.connect(self._on_num_teeth_changed) self.range_lbl = QtGui.QLabel(self.central_wdgt) self.range_lbl.setGeometry(QtCore.QRect(win_width*0.80, win_height*0.08, 150, 16)) self.gear_height_lbl = QtGui.QLabel(self.central_wdgt) self.gear_height_lbl.setGeometry(QtCore.QRect(win_width*0.05, win_height*0.16, 150, 16)) self.gear_height_spin = QtGui.QDoubleSpinBox(self.central_wdgt) self.gear_height_spin.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.16, 100, 22)) self.gear_height_spin.setMinimum(0.01) self.gear_height_spin.setMaximum(100.0) self.gear_height_spin.setSingleStep(0.01) self.gear_height_spin.setValue(self.gear_height) self.gear_height_spin.valueChanged.connect(self._on_hgearear_valuechanged) self.gear_height_mm_lbl = QtGui.QLabel(self.central_wdgt) self.gear_height_mm_lbl.setGeometry(QtCore.QRect(win_width*0.80, win_height*0.16, 32, 16)) # Shaft Information self.with_shaft_check = QtGui.QCheckBox('With shaft', self.central_wdgt) self.with_shaft_check.setGeometry(QtCore.QRect(win_width*0.05, win_height*0.25, 200, 25)) self.with_shaft_check.setChecked(self.with_shaft) self.with_shaft_check.clicked.connect(self._on_checkShaft_clicked) self.shaft_diam_spin = QtGui.QDoubleSpinBox(self.central_wdgt) self.shaft_diam_spin.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.25, 100, 22)) self.shaft_diam_spin.setMinimum(0.01) self.shaft_diam_spin.setMaximum(100.0) self.shaft_diam_spin.setSingleStep(0.01) self.shaft_diam_spin.setValue(self.shaft_diameter) self.shaft_diam_spin.valueChanged.connect(self._on_diameter_shaft_valuechanged) self.shaft_diam_mm_lbl = QtGui.QLabel(self.central_wdgt) self.shaft_diam_mm_lbl.setGeometry(QtCore.QRect(win_width*0.8, win_height*0.25, 32, 16)) self.circular_shaft_radio = QtGui.QRadioButton('Circle', self.central_wdgt) self.circular_shaft_radio.move(win_width*0.25, win_height*0.33) self.circular_shaft_radio.setChecked(self.circular_shaft) self.circular_shaft_radio.clicked.connect(self._on_radioCircle_clicked) self.checkKeyHub = QtGui.QCheckBox('Key hub', self.central_wdgt) self.checkKeyHub.setGeometry(QtCore.QRect(win_width*0.55, win_height*0.33, 200, 25)) self.checkKeyHub.setChecked(self.with_key) self.checkKeyHub.clicked.connect(self._on_checkKeyHub_clicked) self.checkKeyHub.hide() self.hexagonal_shaft_radio = QtGui.QRadioButton('Hexagon', self.central_wdgt) self.hexagonal_shaft_radio.move(win_width*0.25, win_height*0.38) self.hexagonal_shaft_radio.setChecked(not self.circular_shaft) self.hexagonal_shaft_radio.clicked.connect(self._on_radioHex_clicked) # Base information self.checkBase = QtGui.QCheckBox('Add base', self.central_wdgt) self.checkBase.move(win_width*0.05, win_height*0.45) self.checkBase.setChecked(self.with_base) self.checkBase.clicked.connect(self._on_checkBase_clicked) self.base_height_lbl = QtGui.QLabel(self.central_wdgt) self.base_height_lbl.setGeometry(QtCore.QRect(win_width*0.4, win_height*0.45, 32, 16)) self.base_height_lbl.hide() self.base_height_spin = QtGui.QDoubleSpinBox(self.central_wdgt) self.base_height_spin.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.45, 100, 22)) self.base_height_spin.setMinimum(0.01) self.base_height_spin.setMaximum(100.0) self.base_height_spin.setSingleStep(0.5) self.base_height_spin.setValue(self.base_height) self.base_height_spin.valueChanged.connect(self._on_height_base_valuechanged) self.base_height_spin.hide() self.base_height_mm_lbl = QtGui.QLabel(self.central_wdgt) self.base_height_mm_lbl.setGeometry(QtCore.QRect(win_width*0.8, win_height*0.45, 32, 16)) self.base_height_mm_lbl.hide() self.base_diam_lbl = QtGui.QLabel(self.central_wdgt) self.base_diam_lbl.setGeometry(QtCore.QRect(win_width*0.4, win_height*0.54, 32, 16)) self.base_diam_lbl.hide() self.base_diam_spin = QtGui.QDoubleSpinBox(self.central_wdgt) self.base_diam_spin.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.54, 100, 22)) self.base_diam_spin.setMinimum(self.shaft_diameter) self.base_diam_spin.setMaximum(500.0) self.base_diam_spin.setSingleStep(0.5) self.base_diam_spin.setValue(self.base_diameter) self.base_diam_spin.valueChanged.connect(self._on_diameter_base_valuechanged) self.base_diam_spin.hide() self.base_diam_mm_lbl = QtGui.QLabel(self.central_wdgt) self.base_diam_mm_lbl.setGeometry(QtCore.QRect(win_width*0.8, win_height*0.54, 32, 16)) self.base_diam_mm_lbl.hide() # Top information self.top_check = QtGui.QCheckBox('Add top', self.central_wdgt) self.top_check.move(win_width*0.05, win_height*0.63) self.top_check.setChecked(self.with_base) self.top_check.clicked.connect(self._on_checkTop_clicked) self.top_height_lbl = QtGui.QLabel(self.central_wdgt) self.top_height_lbl.setGeometry(QtCore.QRect(win_width*0.4, win_height*0.63, 32, 16)) self.top_height_lbl.hide() self.top_height_spin = QtGui.QDoubleSpinBox(self.central_wdgt) self.top_height_spin.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.63, 100, 22)) self.top_height_spin.setMinimum(0.01) self.top_height_spin.setMaximum(100.0) self.top_height_spin.setSingleStep(0.5) self.top_height_spin.setValue(self.base_height) self.top_height_spin.valueChanged.connect(self._on_height_top_valuechanged) self.top_height_spin.hide() self.top_height_mm_lbl = QtGui.QLabel(self.central_wdgt) self.top_height_mm_lbl.setGeometry(QtCore.QRect(win_width*0.8, win_height*0.63, 32, 16)) self.top_height_mm_lbl.hide() self.top_diam_lbl = QtGui.QLabel(self.central_wdgt) self.top_diam_lbl.setGeometry(QtCore.QRect(win_width*0.4, win_height*0.72, 32, 16)) self.top_diam_lbl.hide() self.top_diam_spin = QtGui.QDoubleSpinBox(self.central_wdgt) self.top_diam_spin.setGeometry(QtCore.QRect(win_width*0.45, win_height*0.72, 100, 22)) self.top_diam_spin.setMinimum(self.shaft_diameter) self.top_diam_spin.setMaximum(500.0) self.top_diam_spin.setSingleStep(0.5) self.top_diam_spin.setValue(self.top_diameter) self.top_diam_spin.valueChanged.connect(self._on_diameter_top_valuechanged) self.top_diam_spin.hide() self.top_diam_mm_lbl = QtGui.QLabel(self.central_wdgt) self.top_diam_mm_lbl.setGeometry(QtCore.QRect(win_width*0.8, win_height*0.72, 32, 16)) self.top_diam_mm_lbl.hide() self.create_btn = QtGui.QPushButton(self.central_wdgt) self.create_btn.setGeometry(QtCore.QRect(win_width*0.65, win_height*0.81, 80, 28)) self.create_btn.clicked.connect(self._on_create_clicked) self.close_btn = QtGui.QPushButton(self.central_wdgt) self.close_btn.setGeometry(QtCore.QRect(win_width*0.2, win_height*0.81, 80, 28)) self.close_btn.clicked.connect(self._on_close_clicked) # Set UI elements to window MainWindow.setCentralWidget(self.central_wdgt) # Set strings to UI self.retranslateUi(MainWindow) # ---------------------------------------------------------------------- # Key Size Chart Standard Metric Keys/Keyways Engineering # TODO: add a reference # ---------------------------------------------------------------------- self.metric_keys = [ {'over': 6, 'upto': 8, 'b': 2, 'h': 2, 't1': 1.2, 't2': 1, 'r': 0.08}, {'over': 8, 'upto': 10, 'b': 3, 'h': 3, 't1': 1.8, 't2': 1.4, 'r': 0.08}, {'over': 10, 'upto': 12, 'b': 4, 'h': 4, 't1': 2.5, 't2': 1.8, 'r': 0.08}, {'over': 12, 'upto': 17, 'b': 5, 'h': 5, 't1': 3, 't2': 2.3, 'r': 0.16}, {'over': 17, 'upto': 22, 'b': 6, 'h': 6, 't1': 3.5, 't2': 2.8, 'r': 0.16}, {'over': 22, 'upto': 30, 'b': 8, 'h': 7, 't1': 4, 't2': 3.3, 'r': 0.16}, {'over': 30, 'upto': 38, 'b': 10, 'h': 8, 't1': 5, 't2': 3.3, 'r': 0.25}, {'over': 38, 'upto': 44, 'b': 12, 'h': 8, 't1': 5, 't2': 3.3, 'r': 0.25}, {'over': 44, 'upto': 50, 'b': 14, 'h': 9, 't1': 5.5, 't2': 3.8, 'r': 0.25}, {'over': 50, 'upto': 58, 'b': 16, 'h': 10, 't1': 6, 't2': 4.3, 'r': 0.25}, {'over': 58, 'upto': 65, 'b': 18, 'h': 11, 't1': 7, 't2': 4.4, 'r': 0.25}, {'over': 65, 'upto': 75, 'b': 20, 'h': 12, 't1': 7.5, 't2': 4.9, 'r': 0.40}, {'over': 75, 'upto': 85, 'b': 22, 'h': 14, 't1': 9, 't2': 5.4, 'r': 0.40}, {'over': 85, 'upto': 95, 'b': 25, 'h': 14, 't1': 9, 't2': 5.4, 'r': 0.40}, {'over': 95, 'upto': 110, 'b': 28, 'h': 16, 't1': 10, 't2': 6.4, 'r': 0.40}, {'over': 110, 'upto': 130, 'b': 32, 'h': 18, 't1': 11, 't2': 7.4, 'r': 0.40}, {'over': 130, 'upto': 150, 'b': 36, 'h': 20, 't1': 12, 't2': 8.4, 'r': 0.70}, {'over': 150, 'upto': 170, 'b': 40, 'h': 22, 't1': 13, 't2': 9.4, 'r': 0.70}, {'over': 170, 'upto': 200, 'b': 45, 'h': 25, 't1': 15, 't2': 10.4, 'r': 0.70}, {'over': 200, 'upto': 230, 'b': 50, 'h': 28, 't1': 17, 't2': 11.4, 'r': 0.70}, ] # ---------------------------------------------------------------------- # Gear Data # pitch - distance between two teeth # u - pitch differential. The radial distance between pitch diameter # and pulley outer diameter is called pitch differential. # h - Tooth height # H - Belt height # r0 - Inner circle radius # r1 - Side circle radius that define the side of a tooth # rs - Small circle radius that define the corner of a tooth # offset- Offset of the side circle center # name - Gear name # group - Type of Gear # TODO: add a reference # ---------------------------------------------------------------------- # GT2 Gear Data self.gt2 = {'pitch': 2.0, 'u': 0.254, 'h': 0.75, 'H': 1.38, 'r0': 0.555, 'r1': 1.0, 'rs': 0.15, 'offset': 0.40, 'name': 'GT2', 'group': 'GT' } # GT3 Gear Data self.gt3 = {'pitch': 3.0, 'u': 0.381, 'h': 1.14, 'H': 2.40, 'r0': 0.85, 'r1': 1.52, 'rs': 0.25, 'offset': 0.61, 'name': 'GT3', 'group': 'GT' } # GT5 Gear Data self.gt5 = {'pitch': 5.0, 'u': 0.5715, 'h': 1.93, 'H': 3.81, 'r0': 1.44, 'r1': 2.57, 'rs': 0.416, 'offset': 1.03, 'name': 'GT5', 'group': 'GT' } def _gt_tooth(self, step, data): """Calculate the coordinates of the GT tooth vertices. Calculate the coordinates of the GT tooth vertices (the teeth of the gear, not the teeth of the timing belt). This calculates the right size of the previous tooth and the left side of the next tooth """ up = app.Vector(0, 0, 1) zero = app.Vector(0, 0, 0) r = (data['dr0'] - data['h']) + data['r0'] cm = _polar(step, r - data['r0'], zero) pt = _polar(step, data['dr0'], zero) ptn = pt.cross(up).normalize() ptd = app.Vector(pt).normalize() * -1 pr = pt + (ptn * data['offset']) pl = pt + (ptn * -data['offset']) a = data['r1']/2 b = a * math.sqrt(3) cl = pr + (ptn * -b) + (ptd * a) cl0 = pr + (ptn * -(data['r1']+data['rs'])) cl1 = pr + (ptn * -data['r1']) + (ptd * data['rs']) ecl = cl0 + (ptd * data['rs']) cl2 = ecl + _bisector_vector(cl0 - ecl, cl1 - ecl, data['rs']) cl3 = pr + _bisector_vector(cl - pr, cl1 - pr, data['r1']) cr = pl + (ptn * b) + (ptd * a) cr0 = pl + (ptn * (data['r1']+data['rs'])) cr1 = pl + (ptn * data['r1']) + (ptd * data['rs']) ecr = cr0 + (ptd * data['rs']) cr2 = ecr + _bisector_vector(cr0 - ecr, cr1 - ecr, data['rs']) cr3 = pl + _bisector_vector(cr - pl, cr1 - pl, data['r1']) return [cr0, cr2, cr1, cr1, cr3, cr, cr, cm, cl, cl, cl3, cl1, cl1, cl2, cl0] def create_gear(self, sketch_gear, data): """Create the geometry of the gear. Create the geometry of the gear. Each tooth is a sequence of arcs (3 points non coincidental vertices). """ tooth_count = data['tooth_count'] angle = 360.0 / tooth_count gear = [] for idx in range(tooth_count): step = angle * idx t = None if data['group'] == 'GT': t = self._gt_tooth(step, data) else: raise Exception('Invalid group {}'.format(data['group'])) if len(gear) > 0: sketch_gear.addGeometry(Part.LineSegment(gear[-1], t[0])) gear.extend(t) for i in range(0, len(t) - 1, 3): sketch_gear.addGeometry(Part.ArcOfCircle(t[i], t[i+1], t[i+2])) sketch_gear.addGeometry(Part.LineSegment(gear[-1], gear[0])) def create_key(self, r, z): y2 = r + self.t2 yb = _circle_intersect_vline(-self.key_b/2, r) pt = _polar(90, yb, app.Vector(0, 0, z)) c1 = _polar(180, self.key_b/2, pt) c4 = _polar(0, self.key_b, c1) pt = _polar(90, y2, app.Vector(0, 0, z)) c2 = _polar(180, self.key_b/2, pt) c3 = _polar(0, self.key_b, c2) c5 = _polar(270, r, app.Vector(0, 0, z)) return [c1, c2, c3, c4, c5] def create(self, data): """Create the FreeCAD elements inside a new document.""" progress_bar = Base.ProgressIndicator() progress_bar.start('Creating gear...', 0) doc = app.newDocument(data['name']) doc_gui = gui.activeDocument() gear = doc.addObject('PartDesign::Body', 'Gear') sketch_gear = gear.newObject('Sketcher::SketchObject', 'SketchGear') sketch_gear.ViewObject.hide() sketch_gear.Support = (gear.Origin.OriginFeatures[3], ['']) # The XY Plane. sketch_gear.MapMode = 'FlatFace' sketch_gear.AttachmentOffset = app.Placement( app.Vector(0, 0, 0), app.Rotation(0, 0, 0, 1)) self.create_gear(sketch_gear, data) r = self.shaft_diameter / 2 if self.with_shaft: if self.circular_shaft: if self.with_key: c = self.create_key(r, 0) key_lst = [] key_lst.append(Part.LineSegment(c[0], c[1])) key_lst.append(Part.LineSegment(c[1], c[2])) key_lst.append(Part.LineSegment(c[2], c[3])) sketch_gear.addGeometry(key_lst, False) sketch_gear.addGeometry(Part.ArcOfCircle(c[3], c[4], c[0])) else: sketch_gear.addGeometry(Part.Circle(app.Vector(0, 0, 0), app.Vector(0, 0, 1), r)) else: ProfileLib.RegularPolygon.makeRegularPolygon( sketch_gear, 6, app.Vector(0, 0, 0), app.Vector(r, 0, 0), False) pad = gear.newObject('PartDesign::Pad', 'Pad') pad.Profile = sketch_gear pad.Length = self.gear_height # Add base to the Gear if self.with_base: sketch_base = gear.newObject('Sketcher::SketchObject', 'SketchBase') sketch_base.ViewObject.hide() sketch_base.Support = (gear.Origin.OriginFeatures[3], ['']) # The XY Plane. sketch_base.MapMode = 'FlatFace' sketch_base.AttachmentOffset = app.Placement( app.Vector(0, 0, -self.base_height), app.Rotation(0, 0, 0, 1)) sketch_base.addGeometry(Part.Circle( app.Vector(0, 0, 0), app.Vector(0, 0, 1), self.base_diameter)) if self.with_shaft: if self.circular_shaft: if self.with_key: c = self.create_key(r, -self.base_height) key_lst = [] key_lst.append(Part.LineSegment(c[0], c[1])) key_lst.append(Part.LineSegment(c[1], c[2])) key_lst.append(Part.LineSegment(c[2], c[3])) sketch_base.addGeometry(key_lst, False) sketch_base.addGeometry(Part.ArcOfCircle(c[3], c[4], c[0])) else: sketch_base.addGeometry(Part.Circle(app.Vector(0, 0, 0), app.Vector(0, 0, 1), r)) else: ProfileLib.RegularPolygon.makeRegularPolygon( sketch_base, 6, app.Vector(0, 0, -self.base_height), app.Vector(self.shaft_diameter/2, 0, 0), False) pad_base = gear.newObject('PartDesign::Pad', 'PadBase') pad_base.Profile = sketch_base pad_base.Length = self.base_height # Add Top to the Gear if self.with_top: sketch_top = gear.newObject('Sketcher::SketchObject', 'SketchTop') sketch_top.Support = (gear.Origin.OriginFeatures[3], ['']) # The XY Plane. sketch_top.MapMode = 'FlatFace' sketch_top.AttachmentOffset = app.Placement( app.Vector(0, 0, self.gear_height), app.Rotation(0, 0, 0, 1)) sketch_top.addGeometry(Part.Circle(app.Vector(0, 0, 0), app.Vector(0, 0, 1), self.top_diameter)) if self.with_shaft: if self.circular_shaft: if self.with_key: c = self.create_key(r, 0) key_lst = [] key_lst.append(Part.LineSegment(c[0], c[1])) key_lst.append(Part.LineSegment(c[1], c[2])) key_lst.append(Part.LineSegment(c[2], c[3])) sketch_top.addGeometry(key_lst, False) sketch_top.addGeometry(Part.ArcOfCircle(c[3], c[4], c[0])) else: sketch_top.addGeometry(Part.Circle( app.Vector(0, 0, 0), app.Vector(0, 0, 1), r)) else: ProfileLib.RegularPolygon.makeRegularPolygon( sketch_top, 6, app.Vector(0, 0, 0), app.Vector(r, 0, 0), False) pad_top = gear.newObject('PartDesign::Pad', 'PadTop') pad_top.Profile = sketch_top pad_top.Length = self.top_height doc.recompute() gui.SendMsgToActiveView('ViewFit') progress_bar.stop() def retranslateUi(self, window): """Set the UI text.""" window.setWindowTitle(_tr('TimingGear', 'GT2/GT3/GT5 Gear Creator')) self.create_btn.setText(_tr('TimingGear', 'Create')) self.close_btn.setText(_tr('TimingGear', 'Close')) self.tooth_count_lbl.setText(_tr('TimingGear', 'Tooth count:')) self.gear_height_lbl.setText(_tr('TimingGear', 'Gear height:')) self.type_lbl.setText(_tr('TimingGear', 'Type of gear:')) self.gear_height_mm_lbl.setText(_tr('TimingGear', 'mm')) self.shaft_diam_mm_lbl.setText(_tr('TimingGear', 'mm')) self.base_height_mm_lbl.setText(_tr('TimingGear', 'mm')) self.base_diam_mm_lbl.setText(_tr('TimingGear', 'mm')) self.top_height_mm_lbl.setText(_tr('TimingGear', 'mm')) self.top_diam_mm_lbl.setText(_tr('TimingGear', 'mm')) self.range_lbl.setText(_tr('TimingGear', '(5 ~ 360)')) self.with_shaft_check.setText(_tr('TimingGear', 'Add shaft\n(Diameter)')) self.hexagonal_shaft_radio.setText(_tr('TimingGear', 'Hexagon')) self.base_height_lbl.setText(_tr('TimingGear', 'H:')) self.base_diam_lbl.setText(_tr('TimingGear', 'D:')) self.top_height_lbl.setText(_tr('TimingGear', 'H:')) self.top_diam_lbl.setText(_tr('TimingGear', 'D:')) self.checkKeyHub.setText(_tr('TimingGear', 'Add key hub')) def _update_max_shaft_diameter(self): info = None gear_type = str(self.type_combo.currentText()) if gear_type == 'GT2': info = dict(self.gt2) elif gear_type == 'GT3': info = dict(self.gt3) else: info = dict(self.gt5) self.max_shaft_diameter = ((self.tooth_count * info['pitch']) / math.pi) / 2 self.shaft_diam_spin.setMaximum(self.max_shaft_diameter) self.with_shaft_check.setText(_tr('TimingGear', 'Add shaft\n(max ' + '{0:.2f}'.format(self.max_shaft_diameter) + ' mm)')) self.base_diam_spin.setValue(self.max_shaft_diameter) self.top_diam_spin.setValue(self.max_shaft_diameter) def update_key_hub(self): if self.shaft_diameter < 6: self.with_key = False return found = False for k in self.metric_keys: if k['over'] <= self.shaft_diameter < k['upto']: self.key_b = k['b'] self.key_h = k['h'] self.t1 = k['t1'] self.t2 = k['t2'] self.checkKeyHub.setText(_tr('TimingGear', 'Add key hub\n(b: {} h: {})'.format( self.key_b, self.key_h))) found = True break if not found: msg = 'Could not find valid key values for shaft radius: {}'.format(shaft_diameter) self._error_dialog(msg) self.with_key = False self.checkKeyHub.setText(_tr('TimingGear', 'Add key hub')) # ----------------------------------- # UI widgets callbacks # ----------------------------------- def _on_gt_type_change(self, idx): # app.Console.PrintMessage('Current index %d selection changed %s\n' % (idx,self.type_combo.currentText())) self._update_max_shaft_diameter() def _on_num_teeth_changed(self, value): # app.Console.PrintMessage('%s Number of Teeths\n' % value) self.tooth_count = value self._update_max_shaft_diameter() def _error_dialog(self, msg): diag = QtGui.QMessageBox(QtGui.QMessageBox.Warning, 'Error in macro TimingGear', msg) diag.setWindowModality(QtCore.Qt.ApplicationModal) diag.exec_() def _on_create_clicked(self): if 5 <= self.tooth_count <= 360: gear_type = str(self.type_combo.currentText()) app.Console.PrintMessage('Creating Gear {}\n'.format(gear_type)) if gear_type == 'GT2': data = dict(self.gt2) elif gear_type == 'GT3': data = dict(self.gt3) else: data = dict(self.gt5) data['tooth_count'] = self.tooth_count data['d'] = (data['tooth_count'] * data['pitch']) / math.pi data['d0'] = data['d'] - (2 * data['u']) data['dr0'] = data['d0'] / 2 app.Console.PrintMessage('pitch {}\n'.format(data['pitch'])) app.Console.PrintMessage('tooth_count {}\n'.format(data['tooth_count'])) app.Console.PrintMessage('u {}\n'.format(data['u'])) app.Console.PrintMessage('d {}\n'.format(data['d'])) app.Console.PrintMessage('d0 {}\n'.format(data['d0'])) app.Console.PrintMessage('dr0 {}\n'.format(data['dr0'])) self.create(data) else: msg = 'The number of teeth should be between 5 and 360!' self._error_dialog(msg) def _on_close_clicked(self): # app.Console.PrintMessage('Exit Gear Generator\n') self.window.close() def _on_hgearear_valuechanged(self, value): # app.Console.PrintMessage(str(value)+ ' height gear\n') self.gear_height = value def _on_radioCircle_clicked(self): self.circular_shaft = True if self.shaft_diameter >= 6 and self.circular_shaft: self.checkKeyHub.show() self.update_key_hub() def _on_radioHex_clicked(self): self.circular_shaft = False self.checkKeyHub.setChecked(False) self.checkKeyHub.hide() def _on_diameter_shaft_valuechanged(self, value): # app.Console.PrintMessage(str(value) + ' Shaft radius\n') if value <= self.max_shaft_diameter: self.shaft_diameter = value self.base_diam_spin.setMinimum(self.shaft_diameter) if self.base_diameter < self.shaft_diameter: self.base_diameter = self.shaft_diameter self.top_diam_spin.setMinimum(self.shaft_diameter) if self.top_diameter < self.shaft_diameter: self.top_diameter = self.shaft_diameter if self.shaft_diameter >= 6 and self.circular_shaft: self.checkKeyHub.show() self.update_key_hub() else: self.checkKeyHub.hide() else: self.shaft_diameter = self.max_shaft_diameter msg = 'The shaft radius should be less than: {}'.format( self.max_shaft_diameter) self._error_dialog(msg) def _on_height_base_valuechanged(self, value): # app.Console.PrintMessage(str(value) + ' Height base\n') self.base_height = value def _on_diameter_base_valuechanged(self, value): # app.Console.PrintMessage(str(value) + ' Radius base\n') self.base_diameter = value def _on_height_top_valuechanged(self, value): # app.Console.PrintMessage(str(value) + ' Height top\n') self.top_height = value def _on_diameter_top_valuechanged(self, value): # app.Console.PrintMessage(str(value) + ' Radius top\n') self.top_diameter = value def _on_checkShaft_clicked(self): self.with_shaft = not self.with_shaft if self.with_shaft: self.circular_shaft_radio.show() self.hexagonal_shaft_radio.show() self.shaft_diam_spin.show() self.shaft_diam_mm_lbl.show() if self.shaft_diameter >= 6 and self.circular_shaft: self.checkKeyHub.show() else: self.circular_shaft_radio.hide() self.hexagonal_shaft_radio.hide() self.shaft_diam_spin.hide() self.shaft_diam_mm_lbl.hide() self.checkKeyHub.setChecked(False) self.checkKeyHub.hide() def _on_checkKeyHub_clicked(self): self.with_key = not self.with_key if self.with_key: self.update_key_hub() def _on_checkBase_clicked(self): self.with_base = not self.with_base if self.with_base: self.base_height_spin.show() self.base_diam_spin.show() self.base_height_lbl.show() self.base_diam_lbl.show() self.base_height_mm_lbl.show() self.base_diam_mm_lbl.show() else: self.base_height_spin.hide() self.base_diam_spin.hide() self.base_height_lbl.hide() self.base_diam_lbl.hide() self.base_height_mm_lbl.hide() self.base_diam_mm_lbl.hide() def _on_checkTop_clicked(self): self.with_top = not self.with_top if self.with_top: self.top_height_spin.show() self.top_diam_spin.show() self.top_height_lbl.show() self.top_diam_lbl.show() self.top_height_mm_lbl.show() self.top_diam_mm_lbl.show() else: self.top_height_spin.hide() self.top_diam_spin.hide() self.top_height_lbl.hide() self.top_diam_lbl.hide() self.top_height_mm_lbl.hide() self.top_diam_mm_lbl.hide() # ----------------------------------- # Create and display the main window # ----------------------------------- MainWindow = QtGui.QMainWindow() ui = TimingGearWindow(MainWindow) MainWindow.show()