# Förena tråd

This page is a translated version of the page Macro JointWire and the translation is 67% complete.
Other languages:
!!! This macro needs to be corrected. !!!
Beskrivning Förena tråd !!! This macro needs to be corrected. !!!Detta makro tillåter att hitta och fästa all icke-ansluten kant till närmaste icke-anslutna en med en linje. Det tar en formmatris i ingången ( [shape1,shape2,...])Versions makro : 0.1Datum senaste ändring : 2011-08-24FreeCAD-versionen : AllLadda ner : ToolBar IconFörfattare : Tremblou Tremblou ToolBar Icon Makros receptSå här installerar du makronHur man anpassar verktygsfält 0.1 2011-08-24 All None None

## Beskrivning

Detta makro hittar alla oanslutna kanter och kopplar ihop dem med den närmaste oanslutna genom att använda en linje. Det har en matrisform i inmatningen ( [shape1,shape2,...]).

## Script

ToolBar Icon

Macro_JointWire.FCMacro

```def findWires(edges):
def verts(shape):
return [shape.Vertexes[0].Point,shape.Vertexes[-1].Point]
def group(shapes):
shapesIn = shapes[:]
pointTst = []
pointOut =[]
for s in shapesIn :
pointTst=pointTst+[s.Vertexes[0].Point]
pointTst=pointTst+[s.Vertexes[-1].Point]
print pointTst
changed = False
for s in shapesIn:
if len(s.Vertexes) < 2:
print "one vertex, its a circle, just add"
else:
for v in verts(s):
twoDot=0
for vv in pointTst:
if v == vv:
twoDot=twoDot+1
if v==vv and twoDot==2 :
changed = True
print "found matching vert"
break
if twoDot<2:
print "didn't find any matching vert..."
pointOut.append(v)
print "Dots non connected", pointOut
return(changed,pointOut)
def joint(point):
for p in range(len(point)/2) :
print point
deltI=Part.Vertex(100,100,100).Point
pos=1
for pp in range(len(point)-1) :
print "position:",pp+1
if len(point)-1>1:
deltN=(point[0]-point[pp+1])
if deltN.Length<deltI.Length:
deltI=deltN
pos=pp+1
print "changement",pos
else:
pos=1
print "points a joindre",point[0],point[pos]
if point[0]!=point[pos]:
Part.show(Part.makePolygon([point[0],point[pos]]))
else:
print "WARNING les points ont la meme valeurs "
point.pop(0)
point.pop(pos-1)
point=0 #to have a return normally void
return(point)
working = True
edgeSet = edges
result = group(edgeSet)
working = result[0]
edgeSet = result[1]
joint(result[1])
return result[1]```