Jump to content

FreeGrid: StorageBox

From FreeCAD Documentation
This page is a translated version of the page FreeGrid StorageBox and the translation is 5% complete.

FreeGrid StorageBox

Menu location
FreeeGrid → Storage box
Workbenches
FreeGrid
Default shortcut
None
Introduced in version
-
See also
None

Description

The FreeGrid StorageBox tool creates a storage box.

This tool is part of the FreeGrid Workbench, an external workbench that can be installed with the Addon Manager.

Usage

  1. There are several ways to invoke the tool:
    • Press the Storage box button.
    • Select the FreeGrid → Storage box option from the menu.
  2. A storage box is created with properties based on the current preferences.
  3. Optionally select the object and change its properties in the Property editor.

Properties

A FreeGrid StorageBox object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Box features

  • DANEBox Grip (Bool): Default is true. Add grip/label area at the rear of the box.
  • DANEBox Grip Depth (Length): Default is 15 mm. Depth of the grip.
  • DANEBox Open Front (Bool): Default is false. Leave the front of the box open.
  • DANEBox Ramp (Bool): Default is true. Add a scoop inside the front of the box.
  • DANEFloor Support (Bool): Default is true. Add integral floor support.

Internal divisions

  • DANEDivision Height (Percent): Default is 100. Height of internal divisions relative to the height of the box.
  • DANEDivisions X (IntegerConstraint): Default is 1. Number of divisions along the X axis.
  • DANEDivisions Y (IntegerConstraint): Default is 1. Number of divisions along the Y axis.

Magnet mount

  • DANEMagnet Diameter (Length): Default is 6 mm. Diameter of the magnets.
  • DANEMagnet Height (Length): Default is 2 mm. Height of the magnets.
  • DANEMagnet Option (Enumeration): Default is allIntersections. Positions of the magnets. The other options are: cornersOny and noMagnets.

Position on grid

  • DANEPosition X (IntegerConstraint): Default is 0. Object position on the grid along the X axis. Starts at zero.
  • DANEPosition Y (IntegerConstraint): Default is 0. Object position on the grid along the Y axis. Starts at zero.

Size

  • DANEDepth (IntegerConstraint): Default is 1. Number of 50 mm units in the Y direction of the object.
  • DANEHeight (Length): Default is 50 mm. Height of the object.
  • DANEWidth (IntegerConstraint): Default is 1. Number of 50 mm units in the X direction of the object.