底图三圆周点绘弧

From FreeCAD Documentation
This page is a translated version of the page Draft Arc 3Points and the translation is 15% complete.
Outdated translations are marked like this.

Draft Arc 3Points

Menu location
Drafting → Arc tools → Arc by 3 points
Workbenches
Draft, Arch
Default shortcut
A T
Introduced in version
0.19
See also
Draft Arc, Draft Circle

描述

底图三圆周点绘弧工具通过输入4个点:中点、半径、第一个点、最后一点,或拾取的切线,或上述若干组合,在当前的工作平面上创建一条圆弧。它将根据Draft Tray中的Draft Linestyle设置来创建对应圆弧。

A Draft Arc is in fact a Draft Circle with a 数据First Angle that is not the same as its 数据Last Angle.

根据圆周上的3个点而定义的弧

如何使用

See also: Draft Tray, Draft Snap and Draft Constrain.

  1. 按下 Draft Arc 3Points按钮,或先按A键再按T键。
  2. 在3D视图中点击第一个点,或输入一个坐标并按下 add point按钮。
  3. 在3D视图中点击第二个点,或输入一个半径值。
  4. 在3D视图中点击第三个点,或输入一个起始角度。

选项

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).

  • To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
  • Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, coordinates are relative to the last point, if available, else they are relative to the coordinate system origin.
  • Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
  • Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating arcs. introduced in version 0.20
  • Press S to switch Draft snapping on or off.
  • Press Esc or the Close button to abort the command.

Notes

  • A Draft Arc can be edited with the Draft Edit command.

Preferences

See also: Preferences Editor and Draft Preferences.

  • If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a non-editable Part Feature instead of a Draft Circle.

属性

属性

弧对象享有Draft Circle中的所有属性,但是有些属性仅对圆形而言才有意义。

脚本

参见: Draft APIFreeCAD Scripting Basics

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a Draft Arc by 3 points use the make_arc_3points method of the Draft module:

arc = make_arc_3points(points, placement=None, face=False, support=None, map_mode="Deactivated", primitive=False)
  • Creates an arc object from the given points list.
  • If a placement is given, the center of the circular arc will be moved to this place. See Placement for more information.
  • If face is True, the arc will make a face, that is, it will appear filled.
  • If support is given, it is a LinkSubList, that is, a list indicating an object and a subelement of that object. This is used so that the object appears referenced to this support.
For example: support=[(obj, ("Face1"))].
  • If map_mode is given, it is a string defining a type of mapping, for example: map_mode='FlatFace', map_mode='ThreePointsPlane', etc. See Part EditAttachment for more information.
  • If primitive is True, the arc created will be a simple Part Feature, not a complex Draft object.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

points = [App.Vector(0, 0, 0),
          App.Vector(5, 10, 0),
          App.Vector(10, 0, 0)]

arc = Draft.make_arc_3points(points)

doc.recompute()