CAM (ЧПУ) GL Симулятор
Appearance
|
|
| Menu location |
|---|
| CAM → CAM Simulator |
| Workbenches |
| CAM |
| Default shortcut |
| P N |
| Introduced in version |
| 1.0 |
| See also |
| CAM Simulator |
Описание
The CAM SimulatorGL command is a new alternative to Legacy CAM Simulator. It's based on low-level OpenGL functions. To eliminate interference with the 3D View of FreeCAD, it works in a separate window with a separate OpenGL context. It's meant to be faster and more precise than the old simulator.
Usage
- There are several ways to invoke the command:
- Press the
CAM Simulator button.
- Select the CAM →
CAM Simulator option from the menu.
- Use the keyboard shortcut: P then N.
- Press the
- De-select any Operations that are not to be simulated
- Tune the Accuracy setting.
- Select the Job for simulation from the drop menu.
- Press the
(Activate / resume simulation) button
- A separate window with the simulator will open.
- Use the left-side buttons: Play, Single-Step, Decrease/Increase simulation speed and the slider to control the animation.
- Use the right-side buttons to: Reset camera, Show/hide overlay of base model, Orbit the model, Display the path and Enable/disable Ambient Occlusion.
- Control the 3D View with the following mouse controls:
- Zoom: use the mouse wheel or hold Ctrl and Shift and move the cursor to zoom in and out
- Pan: hold the middle mouse button or Shift and move the cursor
- Rotate: hold the middle mouse button, then press and hold the left mouse button and move the cursor or hold Alt and move the cursor
Properties
- ДанныеAccuracy: The accuracy of the simulation expressed as a percentage indicating the simulations deviation from the Job. For interactive simulation, reducing accuracy to 0.3 works much faster.
- ДанныеJob: The Job used as the basis of the simulation.
- ДанныеOperation List: The list of Operations selected for inclusion in the simulation.
- Project Commands: New Job, Post Process, Sanity Check, Export Template
- Tool Commands: Inspect Toolpath, Legacy CAM Simulator, CAM Simulator, Finish Selecting Loop, Toggle Operation, ToolBit Library Manager, Add toolbit…
- Basic Operations: Profile, Pocket Shape, Face, Helix, Adaptive, Slot, Drilling, Tapping, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Dressup: Array, Axis Map, Boundary, Dogbone, Drag Knife, Lead In/Out, Ramp Entry, Tag, Z Depth Correction
- Supplemental Commands: Comment, Stop, Custom, Probe, Path From Shape TC
- CAM Modification: Copy oOperation, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area Workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework