CAM Custom/ru
Path Custom |
Системное название |
---|
Path Custom |
Расположение в меню |
Path → Supplemental Commands → Дополнительно |
Верстаки |
Path |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Description
The tool Custom inserts a path object which is built from hand coded custom G-code.
Because the Custom G-code command provides no link to a Tool Controller, if a Tool is used by the custom G-code, the Tool index must be written, along with the Spindle Start M-code, in order that it is passed to the Postprocessor. This ensures that Tool changes and starts will be properly generated.
For example, to convey to the Postprocessor that the Tool used in the Custom G-code operation has Tool index 6, and a Spindle Speed of 10,000, insert the following code at the beginning of the Custom G-code Operation:
(T6: 4mm Endmill)
M6 T6
M3 S10000
Note that Feed rates will be correctly generated by the Postprocessor, only if the Custom G-code Feed rates are written in Units/second.
Usage
- Press the Custom button
- Write custom G-code in the G Code property of the newly created object. Refer to the CAM scripting page for supported G-code commands.
Properties
- ДанныеG Code: The custom G-code commands to build the path on.
- Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template
- Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web