Złożenie 3: Wiązanie stycznie do linii łuku

From FreeCAD Documentation
This page is a translated version of the page Assembly3 ConstraintArcLineTangent and the translation is 10% complete.

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Other languages:

Assembly3 ConstraintArcLineTangent

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

The Arc line tangent command builds a link between two objects of an assembly. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.

Since I couldn't get this tool working here's just the statement of the tool tip: 

Add an "Arc line tangent" constraint to make a line tangent to an arc at the start or end point of the arc.

Usage

  1. Place two objects into an assembly
  2. Select an arc element of one object
  3. Select a line element of the second object
  4. Press the Arc line tangent button.


Depending on the order of the selected lines following errors appear:

Constraint "ArcLineTangent" requires the 1st element to be a circular edge
Constraint "ArcLineTangent" requires the 1st element to be an arc edge