Translations:Wikihouse porting tutorial/21/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
The next step is to create wires from each of our meshes. There is a convenient Macro named [[Macro Extract Wires from Mesh]] that does just that. Install it (Refer to the [[Macros]] page for instructions), then one by one (you can do them all at once, but this macro takes some time), convert all our meshes to wire objects:
The next step is to create wires from each of our meshes. There is a convenient Macro named [[Macro_Extract_Wires_from_Mesh|Macro Extract Wires from Mesh]] that does just that. Install it (Refer to the [[Macros|Macros]] page for instructions), then one by one (you can do them all at once, but this macro takes some time), convert all our meshes to wire objects:

Latest revision as of 19:05, 16 January 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Wikihouse porting tutorial)
The next step is to create wires from each of our meshes. There is a convenient Macro named [[Macro_Extract_Wires_from_Mesh|Macro Extract Wires from Mesh]] that does just that. Install it (Refer to the [[Macros|Macros]] page for instructions), then one by one (you can do them all at once, but this macro takes some time), convert all our meshes to wire objects:

The next step is to create wires from each of our meshes. There is a convenient Macro named Macro Extract Wires from Mesh that does just that. Install it (Refer to the Macros page for instructions), then one by one (you can do them all at once, but this macro takes some time), convert all our meshes to wire objects: