Translations:Toothbrush Head Stand/103/de: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
* Klicke auf den Mittelpunkt des Kreises
* Klicke auf den Mittelpunkt des Kreises
* Klicke auf die horizontale Linie der XY Ebene
* Klicke auf die horizontale Linie der XY Ebene
* Klicke auf[[File:Constraint_Length.png|32px]] [[Sketcher ConstrainDistance/de|'''Abstand''']]
* Klicke auf[[File:Constraint_Length.png|32px]] [[Sketcher_ConstrainDistance/de|'''Abstand''']]
* Ein Dialog fordert dich auf, eine Abmessung festzulegen. Gib 15 mm ein und klicke OK.
* Ein Dialog fordert dich auf, eine Abmessung festzulegen. Gib 15 mm ein und klicke OK.
[[File:TBHS2-23.JPG|800px|center]]

Latest revision as of 17:34, 27 November 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Toothbrush Head Stand)
* Click on the center of the circle
* Click on the horizontal line of the XY plane
* Click on [[File:Constraint_Length.png|32px]] [[Sketcher ConstrainDistance|'''Distance''']]
* A dialog prompts you to set a dimension. Enter 15mm, click OK.
  • Klicke auf den Mittelpunkt des Kreises
  • Klicke auf die horizontale Linie der XY Ebene
  • Klicke auf Abstand
  • Ein Dialog fordert dich auf, eine Abmessung festzulegen. Gib 15 mm ein und klicke OK.