Translations:Sketcher ToggleDrivingConstraint/6/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
 
Line 1: Line 1:
The {{Button|[[File:Sketcher ToggleDrivingConstraint.svg|16px]] [[Sketcher_ToggleDrivingConstraint|Toggle driving constraint]]}} tool turns dimensional constraints (Lock, Horizontal/Vertical distance, Length, Radius and Angle) into reference mode, and back. The icons in the toolbar turn blue, and rather than dimensional constraints, reference dimensions are created. Reference dimensions do not constrain the sketch. It can be useful to create reference dimensions in a sketch as a way to check on measurements; when given a name, they can also be used to drive constraints in another sketch through [[Expressions|expressions]].
The [[Image:Sketcher ToggleDrivingConstraint.svg|24px]] [[Sketcher_ToggleDrivingConstraint|Sketcher ToggleDrivingConstraint]] tool either toggles the [[Sketcher_Workbench#Sketcher_CompDimensionTools|dimensional constraint creation tools]] between driving and reference mode, or toggles selected dimensional constraints between those modes.

Latest revision as of 08:16, 19 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Sketcher ToggleDrivingConstraint)
The [[Image:Sketcher ToggleDrivingConstraint.svg|24px]] [[Sketcher_ToggleDrivingConstraint|Sketcher ToggleDrivingConstraint]] tool either toggles the [[Sketcher_Workbench#Sketcher_CompDimensionTools|dimensional constraint creation tools]] between driving and reference mode, or toggles selected dimensional constraints between those modes.

The Sketcher ToggleDrivingConstraint tool either toggles the dimensional constraint creation tools between driving and reference mode, or toggles selected dimensional constraints between those modes.