Translations:SheetMetal Unfold/6/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
Line 1: Line 1:
To unfold a sheet metal part:
# Select a planar face of the sheet metal part.
# Activate the [[Image:SheetMetal_Unfold.svg|16px]] [[SheetMetal_Unfold|Unfold]] command using one of the following:
# Switch to the [[Image:Sheetmetal_workbench_icon.svg|22px]] [[SheetMetal_Workbench|SheetMetal Workbench]].
#* The {{Button|[[Image: SheetMetal_Unfold.svg |16px]] [[SheetMetal_Unfold|Unfold]]}} button.
# Select a flat face of the sheet metal part. {{Emphasis|Note}}:the face should be a plane, the thickness should be constant
# Click on the [[Image:SheetMetal_Unfold.svg|24px]] '''Unfold''' tool to display a menu in task panel to manage unfolding options.
#* The {{MenuCommand|SheetMetal [[Image:SheetMetal_Unfold.svg|16px]] [[SheetMetal_Unfold|Unfold]]}} menu option.
#* The keyboard shortcut: {{KEY|U}}.
# Select projection options of future flattened sketch
# Adjust unfolding options in the [[Task_panel|task panel]] by:
# Select the rule for bend deduction with [https://github.com/shaise/FreeCAD_SheetMetal#terminology Kfactor]:
#* Selecting the projection options of the unfold sketch.
#* Use [https://github.com/shaise/FreeCAD_SheetMetal#material-definition-sheet Material Definition Sheet]
#* Or select a manual [https://github.com/shaise/FreeCAD_SheetMetal#terminology Kfactor] then the ANSI or DIN standard to apply
#* Selecting the method of bend deduction with [https://github.com/shaise/FreeCAD_SheetMetal#terminology K-factor]: <br> - Use a [https://github.com/shaise/FreeCAD_SheetMetal#material-definition-sheet Material Definition Sheet]. <br> - Select a manual [https://github.com/shaise/FreeCAD_SheetMetal#terminology K-factor] then the ANSI or DIN standard to apply

Revision as of 17:31, 7 March 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (SheetMetal Unfold)
# Select a planar face of the sheet metal part.
# Activate the [[Image:SheetMetal_Unfold.svg|16px]] [[SheetMetal_Unfold|Unfold]] command using one of the following:
#* The {{Button|[[Image: SheetMetal_Unfold.svg |16px]] [[SheetMetal_Unfold|Unfold]]}} button.
#* The {{MenuCommand|SheetMetal → [[Image:SheetMetal_Unfold.svg|16px]] [[SheetMetal_Unfold|Unfold]]}} menu option.
#* The keyboard shortcut: {{KEY|U}}.
# Adjust unfolding options in the [[Task_panel|task panel]] by:
#* Selecting the projection options of the unfold sketch.
#* Selecting the method of bend deduction with K-factor: <br> - Use a [https://github.com/shaise/FreeCAD_SheetMetal#material-definition-sheet Material Definition Sheet]. <br> - Select a manual [https://github.com/shaise/FreeCAD_SheetMetal#terminology K-factor] then the [https://de.wikipedia.org/wiki/Biegeverkürzung#Korrektur_durch_den_sog._k-Faktor ANSI or DIN] standard to apply
  1. Select a planar face of the sheet metal part.
  2. Activate the Unfold command using one of the following:
    • The Unfold button.
    • The SheetMetal → Unfold menu option.
    • The keyboard shortcut: U.
  3. Adjust unfolding options in the task panel by:
    • Selecting the projection options of the unfold sketch.
    • Selecting the method of bend deduction with K-factor:
      - Use a Material Definition Sheet.
      - Select a manual K-factor then the ANSI or DIN standard to apply