Translations:SheetMetal AddCornerRelief/20/en

From FreeCAD Documentation
Revision as of 08:34, 12 May 2022 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Select two edges of a corner.
  2. Activate the SheetMetal AddCornerRelief command using one of the following:
    • The Add Corner Relief button.
    • The SheetMetal → Add Corner Relief menu option.
    • The keyboard shortcut: C then R.