Translations:Robot RestoreHomePos/5/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Category:UnfinishedDocu")
 
No edit summary
 
Line 1: Line 1:
====Note====
[[Category:UnfinishedDocu]]
Il comando consente di spostare un solo robot alla posizione iniziale.
<br />
Se non ci sono robot selezionati, o se ci sono più robot selezionati, viene chiesto di scegliere un solo robot.
<br />
Se non è stata specificata nessuna posizione home tramite [[Robot_SetHomePos/it|Imposta la posizione iniziale]] la posizione occupata dal robot quando viene inserito nella scena verrà utilizzata come posizione iniziale.

Latest revision as of 22:04, 17 March 2016

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Robot RestoreHomePos)
* Command allows only for one robot to set its home position.
* If none or more than one robot is selected, you will be prompted to choose only one robot.
* If no home position has been specified via [[Image:Robot_SetHomePos.svg|32px]] [[Robot_SetHomePos|Robot SetHomePos]] the position of the robot as inserted in the scene will be used as home position.

Note

Il comando consente di spostare un solo robot alla posizione iniziale.
Se non ci sono robot selezionati, o se ci sono più robot selezionati, viene chiesto di scegliere un solo robot.
Se non è stata specificata nessuna posizione home tramite Imposta la posizione iniziale la posizione occupata dal robot quando viene inserito nella scena verrà utilizzata come posizione iniziale.