Translations:Part Slice/22/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "== Version == L'outil a été introduit dans FreeCAD v0.17.8053. FreeCAD doit être compilé avec OCC 6.9.0 ou version ultérieure; Sinon, l'outil n'est pas disponible.")
 
mNo edit summary
Line 1: Line 1:
== Version ==
==Version==
L'outil a été introduit dans FreeCAD v0.17.8053. FreeCAD doit être compilé avec OCC 6.9.0 ou version ultérieure; Sinon, l'outil n'est pas disponible.
L'outil a été introduit dans FreeCAD v0.17.8053. FreeCAD doit être compilé avec OCC 6.9.0 ou version ultérieure; Sinon, l'outil n'est pas disponible.

Revision as of 15:33, 3 October 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Part Slice)
* The tool was introduced in FreeCAD v0.17.8053. FreeCAD needs to be compiled with OCC 6.9.0 or later; otherwise, the tool is unavailable.
* ̈Properties are accessible on the slices inner object, not on the result level.
* The Objects to slice with must completely separate the object to be sliced. Thus a cube cannot be sliced by a wire, but by a plane derived from an extruded wire for instance.
* Slicing object must pass BOP check. See [[Image:Part_CheckGeometry.svg|24px]] [[Part_CheckGeometry|Part CheckGeometry]].

Version

L'outil a été introduit dans FreeCAD v0.17.8053. FreeCAD doit être compilé avec OCC 6.9.0 ou version ultérieure; Sinon, l'outil n'est pas disponible.