Translations:Part Mirror/2/fr: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
'Mise en miroir' - Cet outil crée un nouvel objet (image) qui est la réflexion de l'objet source sélectionné par rapport à un plan miroir. Le plan miroir peut être un plan standard ('''XY''', '''YZ''', ou '''XZ''') ou n'importe quel plan parallèle à un plan standard.
'''Part Miroir''' crée un nouvel objet (image) qui est la réflexion de l'objet source sélectionné par rapport à un plan miroir. Le plan miroir peut être un plan standard ('''XY''', '''YZ''', ou '''XZ''') ou n'importe quel plan parallèle à un plan standard ou ({{Version/fr|1.0}}) tout plan arbitraire en utilisant un objet de référence.

Latest revision as of 09:28, 27 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Part Mirror)
'''Part Mirror''' creates a new object (image) which is a reflection of the original object (source). The image object is created behind a mirror plane. The mirror plane may be standard plane ('''XY''', '''YZ''', or '''XZ'''), any plane parallel to a standard plane, or ({{Version|1.0}}) any arbitrary plane by using a reference object.

Part Miroir crée un nouvel objet (image) qui est la réflexion de l'objet source sélectionné par rapport à un plan miroir. Le plan miroir peut être un plan standard (XY, YZ, ou XZ) ou n'importe quel plan parallèle à un plan standard ou (introduit dans la version 1.0) tout plan arbitraire en utilisant un objet de référence.