Translations:Part Loft Technical Details/12/ro

From FreeCAD Documentation
Revision as of 10:07, 31 October 2018 by Luc (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Pasul 3. Making the loft surface.

A spline interpolation curve (red) that follows the loft surface. The points to interpolate through are shown as red squares.

Dacă există doar două profiluri, suprafețele create sunt suprafețe riglate între segmentele corespunzătoare ale profilurilor. Muchiile/marginile drepte sunt create pentru a conecta vârfurile corespunzătoare ale profilurilor.