Translations:PartDesign tutorial/13/en

From FreeCAD Documentation
Revision as of 19:52, 22 February 2020 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Select the top flat face of the "Revolution"
  2. Select New sketch
  3. Select External Geometry
  4. Approach the edge of the pad. An arc should be highlighted
  5. Select the arc. An arc of a different color should appear in the sketch
  6. Create a hexagon centered on the same point as the arc and set the radius of the reference circle to 5 mm