Translations:PartDesign tutorial/11/ro

From FreeCAD Documentation
Revision as of 12:09, 18 September 2018 by Luc (talk | contribs) (Created page with "# Create a sketch based on the image above # Select 32px Revolution # Set the "Axis" to the "Horizontal Sketch Ax...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Create a sketch based on the image above
  2. Select Revolution
  3. Set the "Axis" to the "Horizontal Sketch Axis"
  4. Set the angle to 360°