Translations:PartDesign Bearingholder Tutorial II/31/ro

From FreeCAD Documentation
Revision as of 08:47, 8 September 2018 by Luc (talk | contribs) (Created page with "The cut-out body inside the skeleton body|thumb|right|400px Next we want two more Pads to hollow out the place for the sealing rings. Duplicate the...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The cut-out body inside the skeleton body

Next we want two more Pads to hollow out the place for the sealing rings. Duplicate the sketch of the first pad of the cut-out Body and map it to the XZ-plane. Edit the sketch and replace the external reference with the outer diameter of the bearing sealing ring. Extrude this sketch to an offset of 3mm of the side of the sealing ring. Repeat the whole process for the sealing ring on the other side.