Translations:PartDesign Bearingholder Tutorial II/29/ro

From FreeCAD Documentation
Revision as of 08:47, 8 September 2018 by Luc (talk | contribs) (Created page with "The first Pad of the cut-out body inside the main body|thumb|right|300px We will now work on the inside of the holder and hollow it out to make spac...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The first Pad of the cut-out body inside the main body

We will now work on the inside of the holder and hollow it out to make space for the bearing and sealing rings. When doing this of course we need to keep in mind the 3mm machining allowance. Since this tutorial teaches the multi-body method, we will create the inside geometry as a separate body and then cut it out of the main body with a boolean operation.