Translations:PartDesign Bearingholder Tutorial II/23/ro

From FreeCAD Documentation
Revision as of 08:47, 8 September 2018 by Luc (talk | contribs) (Created page with "The sketch for the body for the bolts|thumb|right|400px The bolts need two cylindrical bodies on both sides of the main Body. It is best to include...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The sketch for the body for the bolts

The bolts need two cylindrical bodies on both sides of the main Body. It is best to include the 2 degree draft angle in the sketch. I tried revolving a cylinder and later applying a draft, but weird things happened after mirroring it and I couldn't put fillets on it because the surface was warped somehow.