Translations:PartDesign Bearingholder Tutorial I/25/ro

From FreeCAD Documentation
Revision as of 08:30, 8 September 2018 by Luc (talk | contribs) (Created page with "thumb|400px|right|text-top|Sketch of the cut-away inside the pad To reduce the amount of machining required, we also want to cut away some material...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Sketch of the cut-away inside the pad

To reduce the amount of machining required, we also want to cut away some material inside the holder. Again, duplicating the sketch of the first pad is convenient. It doesn't even have to be remapped. Again, the only important dimensions are the machining allowance (3mm) and the outer diameters: 84mm for the place where the bearing will be (90mm - 2x machining allowance), 49mm for the smaller sealing ring (55mm - 2x 3mm) and 62mm for the larger sealing ring.