Translations:Manual:Generating 2D drawings/14/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
 
Line 1: Line 1:
We will now place dimensions and indications on our drawing. There are two ways to add dimensions to a model: one is placing the dimensions inside the 3D model, using the [[Image:Draft_Dimension.svg|16px]] [[Draft_Dimension|Dimension]] tool of the [[Draft_Module|Draft Workbench]], and then placing a view of these dimensions on our sheet with the [[Image:TechDraw_DraftView.svg|16px]] [[TechDraw_DraftView|TechDraw DraftView]] tool. The other is to do things directly on the TechDraw sheet. We'll use the latter method.
We will now place dimensions and indications on our drawing. There are two ways to add dimensions to a model: one is placing the dimensions inside the 3D model, using the [[Image:Draft_Dimension.svg|16px]] [[Draft_Dimension|Dimension]] tool of the [[Draft_Workbench|Draft Workbench]], and then placing a view of these dimensions on our sheet with the [[Image:TechDraw_DraftView.svg|16px]] [[TechDraw_DraftView|TechDraw DraftView]] tool. The other is to do things directly on the TechDraw sheet. We'll use the latter method.

Latest revision as of 21:01, 24 August 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Generating 2D drawings)
We will now place dimensions and indications on our drawing. There are two ways to add dimensions to a model: one is placing the dimensions inside the 3D model, using the [[Image:Draft_Dimension.svg|16px]] [[Draft_Dimension|Dimension]] tool of the [[Draft_Workbench|Draft Workbench]], and then placing a view of these dimensions on our sheet with the [[Image:TechDraw_DraftView.svg|16px]] [[TechDraw_DraftView|TechDraw DraftView]] tool. The other is to do things directly on the TechDraw sheet. We'll use the latter method.

We will now place dimensions and indications on our drawing. There are two ways to add dimensions to a model: one is placing the dimensions inside the 3D model, using the Dimension tool of the Draft Workbench, and then placing a view of these dimensions on our sheet with the TechDraw DraftView tool. The other is to do things directly on the TechDraw sheet. We'll use the latter method.