Translations:Manual:Creating FEM analyses/22/ro

From FreeCAD Documentation
Revision as of 07:25, 16 September 2018 by Luc (talk | contribs) (Created page with "* We will now add a load on the top face, that could represent, for example, a massive weight being placed on the roof. For this we will use a pressure constraint. Press the [...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • We will now add a load on the top face, that could represent, for example, a massive weight being placed on the roof. For this we will use a pressure constraint. Press the Constraint pressure button.
  • Click the top face of the roof, set the pressure to 10MPa (the pressure is applied by square millimeter) and click the OK button. Our force is now applied: