Translations:Macro Delta xyz/1/it: Difference between revisions

From FreeCAD Documentation
mNo edit summary
mNo edit summary
Line 2: Line 2:
|Name=Delta xyz
|Name=Delta xyz
|Icon=Macro_Delta_xyz.png
|Icon=Macro_Delta_xyz.png
|Description=Fornisce il valore Delta xyz e la distanza tra 2 punti. <br />Se si preme il tasto "SHIFT", il valore delta inizia dalla coordinata 0,0,0 fino al punto cliccato (la coordinata 0,0,0 viene visualizzata in rosso). <br /> Un'opzione è possibile per la macro soggiorno residente (continuo) quindi premere il tasto "Q" per uscire dalla macro e l'opzione per imporre il numero di decimali o utilizzare il decimale nell'opzione di preferenza.
|Description=Fornisce il valore Delta xyz e la distanza tra 2 punti.
|Author=Mario52
|Author=Mario52
|Version=0.1
|Version=0.2
|Date=2013-11-29
|Date=2020-10-23
|FCVersion=Tutte versione
|FCVersion=Tutte versione
|Download=[https://www.freecadweb.org/wiki/images/f/f4/Macro_Delta_xyz.png
|Download=[https://www.freecadweb.org/wiki/images/f/f4/Macro_Delta_xyz.png

Revision as of 19:42, 23 October 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Macro Delta xyz)
{{Macro
|Name=Macro Delta xyz
|Icon=Macro_Delta_xyz.png
|Description=Gives the Delta values and distance between 2 points.<br />Start the macro<br />Select the first point in 3D view<br />Select the second point in 3D view<br />If the "SHIFT" key is pressed, the Delta value begin on coordinate 0,0,0 to point clicked  (the coordinate 0,0,0 is displayed in red).<br />One option is possible for the macro stay resident (continuous) then push "Q" key to quit the macro, and option for impose the number of decimals or use the decimal in the preference option.
|Author=Mario52
|Version=0.2
|Date=2020-10-23
|FCVersion=All
|Download=[https://www.freecadweb.org/wiki/images/f/f4/Macro_Delta_xyz.png ToolBar Icon]
|Shortcut={{KEY|SHIFT}}, {{KEY|Q}}
|SeeAlso=[[Part_Measure_Linear|Part Measure Linear]] [[File:Part_Measure_Linear.svg|24px]]
}}

Delta xyz

Descrizione
Fornisce il valore Delta xyz e la distanza tra 2 punti.
Se si preme il tasto "SHIFT", il valore delta inizia dalla coordinata 0,0,0 fino al punto cliccato (la coordinata 0,0,0 viene visualizzata in rosso).
Un'opzione è possibile per la macro soggiorno residente (continuo) quindi premere il tasto "Q" per uscire dalla macro e l'opzione per imporre il numero di decimali o utilizzare il decimale nell'opzione di preferenza.

Versione macro: 0.2
Ultima modifica: 2020-10-23
Versione FreeCAD: Tutte versione
Download: [https://www.freecadweb.org/wiki/images/f/f4/Macro_Delta_xyz.png

Icona per la ToolBar]
Autore: Mario52

Autore
Mario52
Download
[https://www.freecadweb.org/wiki/images/f/f4/Macro_Delta_xyz.png

Icona per la ToolBar]

Link
Versione macro
0.2
Data ultima modifica
2020-10-23
Versioni di FreeCAD
Tutte versione
Scorciatoia
Nessuna
Vedere anche
Part Measure Toggle Delta