Translations:Image Workbench/15/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "若要进行描边处理,最好是令图像距工作平面有个较小的负偏移量,例如-0.1 mm。这就意味着图像将稍稍偏于绘制2D几何图形平面的后...")
 
m (FuzzyBot moved page Translations:Image Module/15/zh-cn to Translations:Image Workbench/15/zh-cn without leaving a redirect: Part of translatable page "Image Module")
 
(No difference)

Latest revision as of 10:06, 22 August 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Image Workbench)
Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

若要进行描边处理,最好是令图像距工作平面有个较小的负偏移量,例如-0.1 mm。这就意味着图像将稍稍偏于绘制2D几何图形平面的后侧,继而就不会把2D底图/草图绘制在图像上了。