Translations:Getting started/38/zh: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
[[Draft Module|制图工作台]]和[[Arch Module|建筑工作台]]的作用与之前提到的其他工作台稍有不同,尽管它们遵循相同的FreeCAD工作台通用的规则。简言之,草图和零件设计主要用于设计单个零件,但在处理多个更简单的对象时,制图和建筑工作台可以简化您的工作。
!!FUZZY!![[Draft_Workbench|制图工作台]]和[[Arch_Workbench|建筑工作台]]的作用与之前提到的其他工作台稍有不同,尽管它们遵循相同的FreeCAD工作台通用的规则。简言之,草图和零件设计主要用于设计单个零件,但在处理多个更简单的对象时,制图和建筑工作台可以简化您的工作。

Latest revision as of 08:58, 28 August 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Getting started)
The [[Draft_Workbench|Draft Workbench]] and [[Arch_Workbench|Arch Workbench]] behave a bit differently than the other workbenches above, although they follow the same rules, which are common to all of FreeCAD. In short, while the Sketcher and PartDesign are made primarily to design single pieces, Draft and Arch are made to ease your work when working with several, simpler objects.

!!FUZZY!!制图工作台建筑工作台的作用与之前提到的其他工作台稍有不同,尽管它们遵循相同的FreeCAD工作台通用的规则。简言之,草图和零件设计主要用于设计单个零件,但在处理多个更简单的对象时,制图和建筑工作台可以简化您的工作。