Translations:FEM tutorial/10/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
 
Line 1: Line 1:
* FreeCAD version 0.17 or above.
* FreeCAD version 0.17 or above.
* [http://sourceforge.net/projects/netgen-mesher/ Netgen] and/or [http://geuz.org/gmsh/ GMSH] is installed on the system (included in the FreeCAD instalation).
* [http://sourceforge.net/projects/netgen-mesher/ Netgen] and/or [http://geuz.org/gmsh/ GMSH] is installed on the system (included in the FreeCAD installation).
* [http://www.calculix.de/ Calculix] is installed on the system (included in the FreeCAD instalation).
* [http://www.calculix.de/ Calculix] is installed on the system (included in the FreeCAD installation).
* The reader has the basic knowledge to use the [[Part_Workbench|Part]] and [[PartDesign_Workbench|PartDesign]] Workbenches.
* The reader has the basic knowledge to use the [[Part_Workbench|Part]] and [[PartDesign_Workbench|PartDesign]] Workbenches.

Latest revision as of 19:54, 5 April 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM tutorial)
* FreeCAD version 0.17 or above.
* [http://sourceforge.net/projects/netgen-mesher/ Netgen] and/or [http://geuz.org/gmsh/ GMSH] is installed on the system (included in the FreeCAD installation).
* [http://www.calculix.de/ Calculix] is installed on the system (included in the FreeCAD installation).
* The reader has the basic knowledge to use the [[Part_Workbench|Part]] and [[PartDesign_Workbench|PartDesign]] Workbenches.
  • FreeCAD version 0.17 or above.
  • Netgen and/or GMSH is installed on the system (included in the FreeCAD installation).
  • Calculix is installed on the system (included in the FreeCAD installation).
  • The reader has the basic knowledge to use the Part and PartDesign Workbenches.