Translations:FEM Install/56/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
 
Line 1: Line 1:
To be able to perform finite element analysis (FEA) within the {{KEY|[[Image:Workbench_FEM.svg|24px]] [[Fem_Workbench|FEM Workbench]]}}, FreeCAD makes use of two external programs: one is used for generating the [[FEM_Mesh|FEM Mesh]], and the other for numerically solving the actual analysis. You can test if your FreeCAD installation is ready for FEA by running the [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]] example which is included with every installation of FreeCAD since v0.17.
To be able to perform finite element analysis (FEA) within the {{KEY|[[Image:Workbench_FEM.svg|24px]] [[FEM_Workbench|FEM Workbench]]}}, FreeCAD makes use of two external programs: one is used for generating the [[FEM_Mesh|FEM Mesh]], and the other for numerically solving the actual analysis. You can test if your FreeCAD installation is ready for FEA by running the [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]] example which is included with every installation of FreeCAD since v0.17.

Latest revision as of 18:49, 21 August 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM Install)
To be able to perform finite element analysis (FEA) within the {{KEY|[[Image:Workbench_FEM.svg|24px]] [[FEM_Workbench|FEM Workbench]]}}, FreeCAD makes use of two external programs: one is used for generating the [[FEM_Mesh|FEM Mesh]], and the other for numerically solving the actual analysis. You can test if your FreeCAD installation is ready for FEA by running the [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]] example which is included with every installation of FreeCAD since v0.17.

To be able to perform finite element analysis (FEA) within the FEM Workbench, FreeCAD makes use of two external programs: one is used for generating the FEM Mesh, and the other for numerically solving the actual analysis. You can test if your FreeCAD installation is ready for FEA by running the FEM CalculiX Cantilever 3D example which is included with every installation of FreeCAD since v0.17.