Translations:FEM Install/3/en

From FreeCAD Documentation
Revision as of 12:49, 4 August 2018 by FuzzyBot (talk | contribs) (Importing a new version from external source)
FEM Mesh Generator

As meshing tool to create a FEM-Mesh netgen is used. See https://sourceforge.net/projects/netgen-mesher/ To use Netgen in FEM module FreeCAD needs to be compiled against netgen libraries. Apart from Netgen a common way to create a FEM Mesh is the use FEM GMSH mesh tool. For the use of this tool GMSH has to be installed on your system. Check out FEM_Mesh#Create_a_FEM_Mesh for the various possibilities to create an FEM Mesh in FreeCAD.