Translations:FEM Install/3/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
In order to create a [[FEM_Mesh|FEM Mesh]], FreeCAD uses [http://gmsh.info/ Gmsh] as the default mesher. Depending on your operating system and your FreeCAD installation Gmsh may be bundled with the FreeCAD installation binaries. If it is not, you can install it separately from FreeCAD and then use the menu {{MenuCommand|Edit → Preferences → FEM → Gmsh}} to set the path to the ''gmsh.exe''.
===== FEM Mesh Generator =====
As meshing tool to create a FEM-Mesh netgen is used. See https://sourceforge.net/projects/netgen-mesher/ To use Netgen in FEM module FreeCAD needs to be compiled against netgen libraries. Apart from Netgen a common way to create a FEM Mesh is the use FEM GMSH mesh tool. For the use of this tool GMSH has to be installed on your system. Check out [[FEM_Mesh#Create_a_FEM_Mesh]] for the various possibilities to create an FEM Mesh in FreeCAD.

Latest revision as of 18:48, 25 March 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM Install)
In order to create a [[FEM_Mesh|FEM Mesh]], FreeCAD uses [http://gmsh.info/ Gmsh] as the default mesher. Depending on your operating system and your FreeCAD installation Gmsh may be bundled with the FreeCAD installation binaries. If it is not, you can install it separately from FreeCAD and then use the menu {{MenuCommand|Edit → Preferences → FEM → Gmsh}} to set the path to the ''gmsh.exe''.

In order to create a FEM Mesh, FreeCAD uses Gmsh as the default mesher. Depending on your operating system and your FreeCAD installation Gmsh may be bundled with the FreeCAD installation binaries. If it is not, you can install it separately from FreeCAD and then use the menu Edit → Preferences → FEM → Gmsh to set the path to the gmsh.exe.