Translations:FEM Install/1/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
Line 1: Line 1:
== Introduction ==
== Introduction ==
To be able to do a Finite Element Analysis (FEA) using the [[Fem_Workbench | FEM Worbench]] FreeCAD makes use of two external programs. One is used for generating the [[FEM Mesh]] and the other for solving the system of equations. If your FreeCAD is set up to do mechanical Finite Element Analysis’s could be checked easily by loading and analyzing an example file. See [[FEM CalculiX Cantilever 3D]]
To be able to perform finite element analysis (FEA) within the [[Fem_Workbench|FEM Workbench]], FreeCAD makes use of two external programs: one is used for generating the [[FEM Mesh]], and the other for numerically solving the actual analysis. You can test if your FreeCAD installation is ready for FEA by running the [[FEM CalculiX Cantilever 3D]] example which is included with every installation of FreeCAD since v0.17.

Revision as of 18:15, 7 April 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (FEM Install)
== Introduction ==

Introduction

To be able to perform finite element analysis (FEA) within the FEM Workbench, FreeCAD makes use of two external programs: one is used for generating the FEM Mesh, and the other for numerically solving the actual analysis. You can test if your FreeCAD installation is ready for FEA by running the FEM CalculiX Cantilever 3D example which is included with every installation of FreeCAD since v0.17.