Translations:FEM CalculiX Cantilever 3D/15/en

From FreeCAD Documentation
Revision as of 09:18, 30 November 2023 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • If the analysis is activated, FreeCAD itself will change the current workbench to FEM.
  • There are at least 5 objects needed to make a static mechanical analysis.
  • analysis container
  1. a solver
  2. a material
  3. a fixed boundary condition
  4. a force load
  5. a FEM mesh
  • In this example, results are already included as well.