Translations:Draft Text/6/cs: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
* Stisknutí klávesy {{KEY|CTRL}} [[Draft_Snap|přichytí]] Váš bod k nejbližšímu uchopovacímu místu, nezávisle na vzdálenosti od něho.
* Stisknutí klávesy {{KEY|CTRL}} [[Draft_Snap/cs|přichytí]] Váš bod k nejbližšímu uchopovacímu místu, nezávisle na vzdálenosti od něho.
* Pro zadání souřadnic ručně, jednoduše zadejte číslo a stiskněte {{KEY|ENTER}} mezi každou z komponent X, Y a Z.
* Pro zadání souřadnic ručně, jednoduše zadejte číslo a stiskněte {{KEY|ENTER}} mezi každou z komponent X, Y a Z.
* Stiskněte klávesu {{KEY|ESC}} nebo tlačítko {{KEY|'''Cancel'''}} pro ukončení aktuálního příkazu
* Stiskněte klávesu {{KEY|ESC}} nebo tlačítko {{KEY|'''Cancel'''}} pro ukončení aktuálního příkazu

Latest revision as of 19:52, 13 May 2014

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Draft Text)
* To manually enter coordinates enter the X, Y and Z component, and press {{KEY|Enter}} after each. Or you can press the {{Button|[[Image:Draft_AddPoint.svg|16px]] Enter point}} button when you have the desired values. It is advisable to move the pointer out of the [[3D_view|3D view]] before entering coordinates.
* Press {{KEY|G}} or click the {{MenuCommand|Global}} checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the [[Draft_SelectPlane|working plane]] coordinate system. {{Version|0.20}}
* Press {{KEY|N}} or click the {{MenuCommand|Continue}} checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating texts. The shortcut does  not work in the second task panel. This option is not available in the first task panel in FreeCAD version 0.19 and earlier.
* Press {{KEY|S}} to switch [[Draft_Snap|Draft snapping]] on or off.
* Press {{KEY|Esc}} or the {{Button|Close}} button to abort the command.
  • Stisknutí klávesy CTRL přichytí Váš bod k nejbližšímu uchopovacímu místu, nezávisle na vzdálenosti od něho.
  • Pro zadání souřadnic ručně, jednoduše zadejte číslo a stiskněte ENTER mezi každou z komponent X, Y a Z.
  • Stiskněte klávesu ESC nebo tlačítko Cancel pro ukončení aktuálního příkazu
  • Stisknutím ENTER nebo Šipka dolu při úpravě textu můžete vložit nebo editovat další řádek textu.
  • Stisknutím klávesy Šipka nahoru můžete editovat předcházející řádek textu.
  • Dvojím stisknutím ENTER (t.j. nevyplnění posledního řádku) přidáte text do dokumentu a ukončíte editor.