Translations:Draft PointArray/18/it: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
Questi sono gli oggetti punto supportati in {{VersionMinus/it|0.20}} e come possono essere creati:
L'oggetto composto di punti può essere creato in diversi modi.
* Creare vari {{Button|[[File:Draft_Point.svg|16px]] [[Draft_Point/it|punti Draft]]}} o {{Button|[[File:Part_Point.svg|16px]] [[Part_Point/it|punti Part]]}}, e poi premere {{Button|[[File:Part_Compound.svg|16px]] [[Part_Compound/it|Crea un composto]]}} per creare il composto .
* [[Part_Compound/it|Part Composto]]: creare uno o più [[Draft_Point/it|Punti Draft]] o [[Part_Point/it|Punti Part]], selezionarli e richiamarli con il comando [[Part_Compound/it|Part Composto]].
* Blocco di Draft: creare uno o più [[Draft_Point/it|Punti Draft]] o [[Part_Point/it|Punti Part]], selezionarli e invocare il comando [[Draft_Upgrade/it|Draft Promuovi]].
* Creare i punti con il metodo precedente ma invece di creare un composto usare {{Button|[[Image:Draft_Upgrade.svg|16px]] [[Draft_Upgrade/it|Upgrade]]}} per creare un "Blocco".
* Creare uno {{Button|[[File:Sketcher_NewSketch.svg|16px]] [[Sketch/it|Schizzo]]}}, e dentro aggiungere vari punti.
* [[Sketcher_NewSketch/it|Sketch]]: Creare uno [[Sketcher_NewSketch/it|Sketch]] e aggiungere uno o più [[Sketcher_CreatePoint/it|Punti Sketch]] allo sketch.

Latest revision as of 19:35, 26 May 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Draft PointArray)
These are the supported point objects in {{VersionMinus|0.20}} and how they can be created:
* [[Part_Compound|Part Compound]]: Create one or more [[Draft_Point|Draft Points]] or [[Part_Point|Part Points]], select them and invoke the [[Part_Compound|Part Compound]] command.
* Draft Block: Create one or more [[Draft_Point|Draft Points]] or [[Part_Point|Part Points]], select them and invoke the [[Draft_Upgrade|Draft Upgrade]] command.
* [[Sketcher_NewSketch|Sketcher Sketch]]: Create a [[Sketcher_NewSketch|Sketch]] and add one or more [[Sketcher_CreatePoint|Sketcher Points]] to the sketch.

Questi sono gli oggetti punto supportati in versione 0.20 e precedenti e come possono essere creati: