Translations:Draft Arc 3Points/4/zh-cn: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
[[Draft Arc 3Points|图三圆周点绘弧]]工具通过输入4个点:中点、半径、第一个点、最后一点,或拾取的切线,或上述若干组合,在当前的[[Draft SelectPlane|工作平面]]上创建一条圆弧。它将根据[[Draft Tray]]中的[[Draft Linestyle]]设置来创建对应圆弧。
[[Draft Arc 3Points|图三圆周点绘弧]]工具通过输入4个点:中点、半径、第一个点、最后一点,或拾取的切线,或上述若干组合,在当前的[[Draft SelectPlane|工作平面]]上创建一条圆弧。它将根据[[Draft Tray]]中的[[Draft Linestyle]]设置来创建对应圆弧。

Latest revision as of 14:16, 19 October 2020

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Draft Arc 3Points)
The [[Image:Draft_Arc_3Points.svg|24px]] '''Draft Arc 3Points''' command creates a circular arc on the current [[Draft_SelectPlane|working plane]] from three points that define its circumference. The center and radius are calculated from these points.

底图三圆周点绘弧工具通过输入4个点:中点、半径、第一个点、最后一点,或拾取的切线,或上述若干组合,在当前的工作平面上创建一条圆弧。它将根据Draft Tray中的Draft Linestyle设置来创建对应圆弧。