Translations:Basic Part Design Tutorial/7/de: Difference between revisions

From FreeCAD Documentation
No edit summary
m (FuzzyBot moved page Translations:Basic Part Design Tutorial 017/7/de to Translations:Basic Part Design Tutorial/7/de without leaving a redirect: Part of translatable page "Basic Part Design Tutorial 017")
(No difference)

Revision as of 09:41, 1 May 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Basic Part Design Tutorial)
Next you will want to use the [[Image:Sketcher_CreatePolyline.svg|24px|link=Sketcher_CreatePolyline]] [[Sketcher_CreatePolyline|Polyline]] tool and make a shape roughly like that in the next image. It does not need to be perfect as the final shape is done with constraints. Once you have the basic shape, we will start applying the constraints. If you had Auto constraints on, some of these constraints will have been applied automatically, if not, do the following. But first make sure that you have exited the Polyline tool by right-clicking or pressing {{KEY|ESC}} twice; the mouse cursor should turn back from a cross-hair to the standard arrow cursor. Don't press {{KEY|ESC}} a third time or you will exit edit mode; if this happens, click on the Model tab, then double-click the Sketch element in the tree, or right-click and select '''Edit sketch''' in the context menu. To avoid leaving edit mode when pressing {{KEY|Esc}} too often, change the '''Esc can leave sketch edit mode''' preference ({{Version|0.19}}), see [[Sketcher_Preferences#General|Sketcher Preferences]].

Die Skizze erstellen

Als nächstes das Polylinie Werkzeug verwenden und eine Form ähnlich der im nächsten Bild erstellen. Es muss nicht perfekt sein, da die endgültige Form durch Einschränkungen erzeugt wird. Sobald die Grundform erstellt ist, werden die Einschränkungen angewandt. Wenn die automatischen Einschränkungen aktiviert sind, werden einige dieser Einschränkungen automatisch angewendet, andernfalls fügt man die folgenden Schritte aus. Doch zuerst muss das Polylinien-Werkzeug durch einen Rechtsklick oder zweimaliges Drücken der Esc-Taste verlassen worden sein; der Maus-Cursor sollte von einem Fadenkreuz zurück zum Standard-Pfeil-Cursor gewechselt sein. (Drücken Sie die EscTaste _nicht_ ein drittes Mal, sonst wird der Skizzeneditiermodus verlassen. Falls das passiert, auf den Modell-Reiter klicken, dann doppelt auf das Skizzenelement im Baum klicken oder rechts klicken und Skizze editieren im Kontextmenü wählen).