Translations:Assembly3 Workbench/7/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Mimo, że mogą mieć podobne narzędzia, Assembly3 nie jest zgodne z A2plus ani Assembly4. Modele stworzone w tych środowi...")
 
No edit summary
 
Line 1: Line 1:
Mimo, że mogą mieć podobne narzędzia, Assembly3 nie jest zgodne z [[A2plus_Workbench/pl|A2plus]] ani [[Assembly4_Workbench/pl|Assembly4]]. Modele stworzone w tych środowiskach powinny być otwierane tylko w odpowiadających im środowiskach.
Mimo, że mogą mieć podobne narzędzia, środowisko Złożenie 3 nie jest zgodne ze środowiskiem [[A2plus_Workbench/pl|A2plus]] ani [[Assembly4_Workbench/pl|Złożenie 4]]. Modele stworzone w tych środowiskach powinny być otwierane tylko w odpowiadających im środowiskach.

Latest revision as of 05:21, 25 July 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Assembly3 Workbench)
Although they may have similar tools, Assembly3 is not compatible with [[A2plus_Workbench|A2plus]] nor [[Assembly4_Workbench|Assembly4]]. Models created with these workbenches should be opened only with their respective workbench.

Mimo, że mogą mieć podobne narzędzia, środowisko Złożenie 3 nie jest zgodne ze środowiskiem A2plus ani Złożenie 4. Modele stworzone w tych środowiskach powinny być otwierane tylko w odpowiadających im środowiskach.