Translations:Arch Window/29/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
(Importing a new version from external source)
Line 2: Line 2:
# Switch to the [[Sketcher Module|Sketcher Workbench]].
# Switch to the [[Sketcher Module|Sketcher Workbench]].
# Create a new sketch.
# Create a new sketch.
# Draw one or more closed wires.
# Draw one or more closed wires (loops).
# Close the sketch.
# Close the sketch.
# Switch back to the [[Arch Module|Arch Workbench]].
# Switch back to the [[Arch Module|Arch Workbench]].
# Press the {{Button|[[Image:Arch Window.svg|16px]] [[Arch Window|Arch Window]]}} button, or press {{KEY|W}} then {{KEY|I}} keys.
# Press the {{Button|[[Image:Arch Window.svg|16px]] [[Arch Window|Arch Window]]}} button, or press {{KEY|W}} then {{KEY|I}} keys.
# Enter Edit mode by double-clicking the window in the tree view, to adjust the window components.
# To adjust the window components and various properties, enter the window [[task panel|task panel]] by double-clicking on the created object in the [[tree view|tree view]].

Revision as of 19:20, 6 October 2019

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Arch Window)
# Optionally, select a face on the Arch object where you want the window to be included.
# Switch to the [[Sketcher_Workbench|Sketcher Workbench]].
# Create a new sketch.
# Draw one or more closed wires (loops). Pay close attention to the creation order of these loops, the numbering of the "wires" in the [[task panel|task panel]] ("Window elements") depends on this.
# Close the sketch.
# Switch back to the [[Arch_Workbench|Arch Workbench]].
# Press the {{Button|[[Image:Arch Window.svg|16px]] [[Arch Window|Arch Window]]}} button, or press {{KEY|W}} then {{KEY|I}} keys.
# To adjust the window components and various properties, enter the window [[task panel|task panel]] by double-clicking on the created object in the [[tree view|tree view]].
# Note that since components following a hinged component will also hinge, all fixed components, such as outer frames and fixed glass panels, must be defined before any hinged components. And a glass panel in a hinged frame must be defined after that frame, and before any other hinged components.
  1. Optionally, select a face on the Arch object where you want the window to be included.
  2. Switch to the Sketcher Workbench.
  3. Create a new sketch.
  4. Draw one or more closed wires (loops).
  5. Close the sketch.
  6. Switch back to the Arch Workbench.
  7. Press the Arch Window button, or press W then I keys.
  8. To adjust the window components and various properties, enter the window task panel by double-clicking on the created object in the tree view.