Translations:Arch SectionPlane/6/en

From FreeCAD Documentation
Revision as of 08:45, 2 January 2023 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Optionally, set the Draft Working Plane to reflect the plane where you want to place the Section Plane.
  2. Select objects you want to be included in your section view.
  3. Press the Section Plane button or press S then P keys.
  4. Move/rotate the Section Plane into correct position if needed.
  5. Select the Section Plane if not selected already.
  6. Use either Draft Shape2DView or TechDraw ArchView to create a view.