Translations:Arch Roof/18/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
Line 1: | Line 1: | ||
# Create a wire with following the counter-clockwise direction and select it. |
# Create a closed wire with following the counter-clockwise direction and select it. |
||
#:[[Image:CounterclockwiseWire.png|600px]] |
#:[[Image:CounterclockwiseWire.png|600px]] |
||
# Press the {{Button|[[Image:Arch Roof.svg|16px]] [[Arch Roof|Arch Roof]]}} button, or press {{KEY|R}} then {{KEY|F}} keys |
# Press the {{Button|[[Image:Arch Roof.svg|16px]] [[Arch Roof|Arch Roof]]}} button, or press {{KEY|R}} then {{KEY|F}} keys |
Revision as of 18:14, 19 March 2023
- Create a closed wire with following the counter-clockwise direction and select it.
- Press the Arch Roof button, or press R then F keys
- The default roof object could have a strange shape, it's because the tool is missing some necessary information.
- After creating the default roof, double click on the object in the tree view to access and edit all the properties. Angle must be between 0 and 90.
- Each line corresponds to a roof pane. So you can set the properties you want for each roof pane.
- To help you, you can set
Angle
orRun
to0
and define aRelative Id
, this makes an automatic calculation to find the data relative to theRelative Id
. - It works like this:
- If
Angle = 0
andRun = 0
then profile is identical to the relative profile. - If
Angle = 0
thenAngle
is calculated so that the height is the same one as the relative profile. - If
Run = 0
thenRun
is calculated so that the height is the same one as the relative profile.
- If
- Finally, set an Angle to 90° to make a gable.
- Note: for better comprehension, please see this youtube clip.