Translations:Arch Rebar/20/it: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
 
Line 1: Line 1:
Gli oggetti Armature sono basati su profili 2D come gli [[Sketcher Module/it|schizzi]] o gli [[Draft Module/it|oggetti draft]], che devono essere disegnati su una faccia di un oggetto struttura. Dopo la creazione è possibile modificare la configurazione delle armature, come il numero e il diametro delle barre, o la distanza tra le estremità dell'elemento strutturale.
Gli oggetti Armature sono basati su profili 2D come gli [[Sketcher_Workbench/it|schizzi]] o gli [[Draft_Workbench/it|oggetti draft]], che devono essere disegnati su una faccia di un oggetto struttura. Dopo la creazione è possibile modificare la configurazione delle armature, come il numero e il diametro delle barre, o la distanza tra le estremità dell'elemento strutturale.

Latest revision as of 11:48, 21 August 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Arch Rebar)
Rebar objects are based on 2D profiles such as [[Draft Workbench|Draft objects]] and [[Sketcher Workbench|Sketches]], that must be drawn on a face of the structural object. After creation you can adjust the properties of the rebar, including the number and diameter of the bars, and the offset distance between them and the faces of the structural element.

Gli oggetti Armature sono basati su profili 2D come gli schizzi o gli oggetti draft, che devono essere disegnati su una faccia di un oggetto struttura. Dopo la creazione è possibile modificare la configurazione delle armature, come il numero e il diametro delle barre, o la distanza tra le estremità dell'elemento strutturale.